The Complete DIY Guide to Updating Your Mach-E with FDRS (Alternative to Forscan)

[su-ch+mache]

GWM, APIM, and then TCU...and then other things.

There have been instances of back-to-back GWM updates, so don't be surprised if that happens to you.

Thanks for the quick feedback.

I've seen two or three updates each for GWN and APIM.

Is there a way to determine which needs to be run first or does it not matter?

Sponsored

 

[Mike G]

Thanks for the quick feedback.

I've seen two or three updates each for GWN and APIM.

Is there a way to determine which needs to be run first or does it not matter?

Always GWM, APIM and TCU in that order.

 

[su-ch+mache]

Always GWM, APIM and TCU in that order.

Thanks, yes I know about the order.

But I found 2 or 3 GWM updates in FDRS. The qestion was, is there any way to determine which of the updates needs to be run first.

 

[Snakebitten]

I have never seen more than one update in FDRS per module at a time.
Or put another way, never seen GWM listed twice.

 

[su-ch+mache]

ok, I will double check and in case its there twice I provide a screen shot.

 

[Eric_C_Boston]

I do not use 1PD so I did not see any problems when I updated the drivetrain modules last month. I did the update today that is suppose to fix the problem for my 2021 MME RWD ER.

PCM
DA01 Assembly  MJ98-12A650-BDX -> MJ98-12A650-BDZ
F188 Strategy  MJ98-14C204-BDX -> MJ98-14C204-BDZ

BECM
DA01 Assembly  NJ98-10B687-BL -> NJ98-10B687-BM
F188 Strategy  NJ98-14C197-BL -> NJ98-14C197-BM

SOBDMC
DA01 Assembly  NJ98-7P120-SK -> NJ98-7P120-SL
F188 Strategy  NJ98-14G069-SK -> NJ98-14G069-SL

I also noticed the CBZMap was updated OTA from MU5T-14H394-AAR to MU5T-14H394-AAT since April 2024.

 

[JM22681]

Hi all, have a question related to FDRS and available configurations. My problem is that my USB-C port in the front is not outputting enough power to work with my TWRAPS magsafe charger. Does FDRS have any configurations to control the amperage or output of that port?

I have a 2023 Job 2 GT and have confirmed using the same accessory in my house using a USB-C power brick it works fine, but when I'm in the car the connection is not powerful enough. Has anyone else run in to this?

 

[MrLoganRoss]

I have a 2023J2 and no issues. Perhaps your TWRAPS is defective.

 

[JM22681]

I have a 2023J2 and no issues. Perhaps your TWRAPS is defective.

TWRAPS already sent me a 2nd one. Confirmed it's not their issue because I bring it inside and it works.

 

[grein002]

are you trying to charge 1 device or 2 devices?

 

[JM22681]

are you trying to charge 1 device or 2 devices?

Just 1. And only USB-C is being used. So there are no USB throttling configs?

 

[JM22681]

I have a 2023J2 and no issues. Perhaps your TWRAPS is defective.

Do you have the TWRAPS? A GT?

 

[MrLoganRoss]

Yes

 

[Mike G]

 

[Snakebitten]

I couldn't get logged in successfully yesterday with 40.4.5
Rather than fuss with it, I rolled back to 40.4.1

FDRS can be so fussy since they went to SSO.

Sponsored