The Complete DIY Guide to Updating Your Mach-E with FDRS

[richsi]

It’s a good idea, but I’m not sure how useful it will be to share with others. Because each car will have a different set of updates depending on how long it’s been since last updates, or if some modules were updated OTA.
FDRS itself keeps a log of which updates were performed and success/ failure of each.

Occasionally, there has been a buggy update that should be avoided, or a recommended install order, but again will be only relevant to those at the same versions starting the update. This thread has been good about sharing that info.

More just like a log sheet to keep track of modules, conditions, settings, quirks, version numbers etc. Meant only to be a shared form for others to use and share their settings and stuff like that. I find it useful to keep information when asked about a certain issue with a module. Nothing more than that really. Just looking for ideas about headings and information to design a form.

Sponsored

 

[Mike G]

More just like a log sheet to keep track of modules, conditions, settings, quirks, version numbers etc. Meant only to be a shared form for others to use and share their settings and stuff like that. I find it useful to keep information when asked about a certain issue with a module. Nothing more then that really.

Oh I see...I have a spreadsheet for that. I update it with the engineering part numbers and software revisions (F188 DID). I didn't know that's what you were talking about.

 

[richsi]

Oh I see...I have a spreadsheet for that. I update it with the engineering part numbers and software revisions (F188 DID). I didn't know that's what you were talking about.

I'd like to see it if you care to share it.

 

[Mike G]

I'd like to see it if you care to share it.

Not a problem.

This is a completely up-to-date listing for my '21J1 AWD Prem ER car manufactured in early May '21.

Software revs are based on the F188 DID reference.

 

[Mike G]

I see I've got a new PSCM (power steering) update this morning that wasn't there yesterday. I've checked three other VINs this morning and they all have it as well. It's probably BC 1.00098 ?

 

[Arjan]

Still patiently waiting for Sync4a update to appear on our european cars..

 

[markboris]

I see I've got a new PSCM (power steering) update this morning that wasn't there yesterday. I've checked three other VINs this morning and they all have it as well. It's probably BC 1.00098 ?

Interesting..... Mine ('21 J2) and two others I updated this week (both '21 J1), don't show having this update, at least yet.

 

[Mike G]

Interesting..... Mine ('21 J2) and two others I updated this week (both '21 J1), don't show having this update, at least yet.

Literally showed up this morning. Wasn't there yesterday.

 

[Mike G]

Still patiently waiting for Sync4a update to appear on our european cars..

Ahhh yes...Sync 640....

 

[markboris]

Literally showed up this morning. Wasn't there yesterday.

I should have said, I just checked all three VIN's and they don't show this update which I find interesting since you have a '21 I figured these would have it also. Maybe updates don't show up all at once on every vehicle that are available for them?

 

[Mike G]

I should have said, I just checked all three VIN's and they don't show this update which I find interesting since you have a '21 I figured these would have it also.

That is strange. Your two VINs don't have this update. I've checked about 7 VINs this morning and out of those, 4 have the update showing, all are '21 models (so far).

 

[markboris]

That is strange. Your two VINs don't have this update. I've checked about 7 VINs this morning and out of those, 4 have the update showing, all are '21 models (so far).

I'm not concerned about it or anything, just thought I would mention it since I saw you had the update and I didn't. And thanks Mike for all you do on this forum. ?

 

[Mike G]

Well now I'm going through the list cause I'm curious....I'm up to 8 now that have it, only one was from the EU. Maybe it's a slow rollout...dunno.

 

[dreKion]

Well now I'm going through the list cause I'm curious....I'm up to 8 now that have it, only one was from the EU. Maybe it's a slow rollout...dunno.

I also have this update in FDRS, EU Job1

Edit: updated with fdrs. All ok, about 10 min to install

 

[Wonky_Donkey]

Well now I'm going through the list cause I'm curious....I'm up to 8 now that have it, only one was from the EU. Maybe it's a slow rollout...dunno.

I just checked a load of EU VINs and all the 2021 models seem to have the new PSCM update showing as available. However the EU 2022 models are not showing the update (mine included) ?

Sponsored