Looks like you have activated my updates by checking my VIN, Rob ?. After you have send me this info, today I received my first OTA update ever: 3.5.2.1.
Thank you Rob!
Nah...it's still ....676-DT
Wanted to post that I did a PMI on my GWM today and that sorted my missing "Watch" section in the Entertainment screen area.
I checked it again and you’re right. Converted back to 676-DTNah...it's still ....676-DT
FDRS throws some nonsense in that block sometimes.
When you see stuff like that in the APIM software revision always look down in the details for the DID F188 value. When I pulled it up it was correct. Sometimes you need to "delete" that VIN from your "New Vehicle" list and re-enter the VIN in the hopes that will clear out the cache.
Always check the details (DID F188)if the APIM or another module software revision looks out of place:
I’m also stuck in the same spot since October, with a very similar VIN. Would someone mind doing a check of what updates are available for me?
Quick question if the HVAC update got done should my vehicle be in 3.6.1 for the software? Because the 3.5.4.2 update still stayed the same.Well the powertrain ones are all tweaked versions of the recalled ones from last year. The OBCC updates the DC fast charging. And the door updates were reversions from the -AL you have now back to the -AH we all had last summer. I don't know why those got reverted but apparently somebody ran into problems with the -AL versions. ?‍
As far as an "equivalency" I would guess so...but you won't see that reflected in the PowerUp stuff in Sync. The PowerUp notes or versions only reflect what you actually got via OTA. If you do every single update to get you completely current and with Sync 640 you won't see your car say you've gotten OTA 4.1.1. It just shows the last OTA you got...(or none at all).
