Post here if you have an active FDRS account and are willing to look up info for others

[mitch]

Well I'm very glad to hear that you got PowerUp 4.2.1 finally. And I know you're looking for those UI changes. So I've got good news and bad news.....

The bad news is that OTA 4.2.1 is a gateway (GWM) update so you won't see any UI changes until you get a Sync (APIM) update.

The good news is that you now have an APIM update in your list as a result of getting that GWM done:

So keep doing the same thing you did to get the gateway update but it might take a bit longer to download since this new UI update is pretty big. Let me know what Sync version you end up with when it's done and what the PowerUp version is (I think it will be 4.1.2).

Success again! I received 4.2.2 sometime yesterday evening. I drove a fair amount and was parked, at the same establishment I received the last update, for about 3 hours. I had scheduled updates set for a few minutes after I turned the car off. (I had tried a few other times throughout the day). Between 5p central and about 7:30 the update was downloaded? and installed. Maybe I've been lucky as the roll outs seem to be coming out quicker for many, but wanted to share what may or may not have helped me. I guess I'm now waiting for 4.2.3? haha, never ending!

Sync version 23031_PRODUCT Rev 713

Sponsored

 

[Woeo]

I have limited time to look up available FDRS updates

3FMTK3SU5MMA09493 please

 

[CAL465]

3FMTK3SU5MMA09493 please

 

[kdonnel]

I'm wondering if the TCU update that is 4.2.4 has shown up for me.

3FMTK2R73NMA04935

 

[Gyrfalcon08]

I have limited time to look up available FDRS updates

3FMTK3R72MMA47084 please. 21 Job 2 on 4.2.2 Curious if any OTA have cleaned up some old FDRS updates. Thanks!

 

[CAL465]

3FMTK3R72MMA47084 please. 21 Job 2 on 4.2.2 Curious if any OTA have cleaned up some old FDRS updates. Thanks!

 

[Woeo]

Still no PSCM and second/new HVAC. Hmmm.

 

[CAL465]

I'm wondering if the TCU update that is 4.2.4 has shown up for me.

3FMTK2R73NMA04935

doesn't look like it.

 

[CAL465]

I posted up above, but it might have gotten lost. If you don't mind, I'd appreciate you checking mine.

I bought my 2021 used a few days ago, and it seems to have had no updates ever, still on the original software.

VIN: 3FMTK3SU9MMA03261

Thanks!

 

[kdonnel]

doesn't look like it.

That is it.

I guess I can either wait to see if I get it OTA before updating it myself.

I am just not sure it will show up OTA based on my car saying that 4.2.2 is Not Completed despite the Sync version being 713 and having applied the GWM that is 4.2.3.

 

[CAL465]

I have had my 2022 Mach-E (3FMTK3R70NMA02212) for almost a year and figure it's time to find out what non over-the-air updates I'm missing.

I'm very grateful if someone can generate me a list of updates.

Thanks in advance!

 

[MattLewis]

Thank you CAL465! Looks like it will be worth me learning how to update those modules. I have the equipment. Just need a license. Thank again!

 

[Mike G]

That is it.

I guess I can either wait to see if I get it OTA before updating it myself.

I am just not sure it will show up OTA based on my car saying that 4.2.2 is Not Completed despite the Sync version being 713 and having applied the GWM that is 4.2.3.

So when you check this software updates page and you see this where it says Not Completed......if you wait like 15 seconds does it change to Completed? Mine has done that a couple of times. Said initially it hadn't completed and then while I was watching it, it changed to Completed. One thing you can say for the PowerUp game...they it will certainly keep you entertained!

 

[kdonnel]

So when you check this software updates page and you see this where it says Not Completed......if you wait like 15 seconds does it change to Completed? Mine has done that a couple of times. Said initially it hadn't completed and then while I was watching it, it changed to Completed. One thing you can say for the PowerUp game...they it will certainly keep you entertained!

Just tried.

Left it on the screen for about 5 minutes. Still says Not Completed.

It sounds like some 22’s have received 4.2.4 OTA recently. I’ll wait for a few days and see if it comes, if not I will apply it via FDRS.

 

[TimDP]

Is there someone who would be willing to run my VIN please?
WF0TK1EM4NMA63613

Thanks in advance!

I posted up above, but it might have gotten lost. I was wondering if someone could run my VIN and check to see if any of my modules need updating?

Many thanks!

Sponsored