Post here if you have an active FDRS account and are willing to look up info for others

[Mike G]

I received 6.2.1 yesterday, so my APIM is now up to date, but I'm wondering if there is anything left at the moment?

3FMTK3RM1MMA56588

Thanks in advance for your help!

A TCU update is all I see. That would have been the next thing as an OTA anyway...following the recent reports and progression towards BC 1.3.

Sponsored

 

[CarGuy11]

I've had a few OTAs the past few days. Can I get a check? Thanks!! 3FMTK3SU9NMA41574

 

[chesteroberto]

A TCU update is all I see. That would have been the next thing as an OTA anyway...following the recent reports and progression towards BC 1.3.

Great, and thanks again, Mike!

 

[Mike G]

I've had a few OTAs the past few days. Can I get a check? Thanks!! 3FMTK3SU9NMA41574

 

[Peyole]

Took my car into the dealer yesterday for the charging port software recall so I am curious which updates they did. Here is the list pulled on November 27 for comparison. Been sitting on "Not completed" for the 6.2 re-release (23-PU1103-NAT-VCE) for two weeks as well.

VIN: 3FMTK3R71NMA30391

 

[Gatorguy]

Thank you, Mike! I will check back after they service it.

Mike,
The dealer says they have updated the modules related to CSP #23B50. However, they did not want to update the software for all back level modules. They said that "it would take more money than I wanted to pay..." to update all the module levels. I don't know if that is typical of most dealers or not? Would you mind seeing if at least some of the modules have now been updated? Thank you!

 

[Mike G]

Took my car into the dealer yesterday for the charging port software recall so I am curious which updates they did. Here is the list pulled on November 27 for comparison. Been sitting on "Not completed" for the 6.2 re-release (23-PU1103-NAT-VCE) for two weeks as well.

VIN: 3FMTK3R71NMA30391

And today:

That APIM is the re-release version.

 

[Mike G]

Mike,
The dealer says they have updated the modules related to CSP #23B50. However, they did not want to update the software for all back level modules. They said that "it would take more money than I wanted to pay..." to update all the module levels. I don't know if that is typical of most dealers or not? Would you mind seeing if at least some of the modules have now been updated? Thank you!

It is typical.

Here is your list today:

I'm thinking that TCU update might be your next OTA.

 

[music_cities]

Would someone be so kind as to check 3FMTK4SX8NMA64571 ?

 

[rugedraw]

Would someone be so kind as to check 3FMTK4SX8NMA64571 ?

Your vehicle is behind on OTA's. Update 3.5.3 installed on 11/30 after the third time it was sent to your car. Based on the warranty start date and mileage, it seems like you've only had the vehicle a few months. Now that it is being started and driven, I'm sure more updates will come sooner than later. I don't have access to my laptop with FDRS until later, but I'm sure the list of pending updates is a long one. Mike will probably get to you before I can, but if he does not, I will provide you with the list later.

 

[Mike G]

Would someone be so kind as to check 3FMTK4SX8NMA64571 ?

Here's your available software list:

You're looking for that GWM to arrive as an OTA next.....hopefully...

More things will show up after that gateway is updated. I believe you are currently on Sync version 539, while many of us are at 1049 or higher.

 

[Peyole]

And today:

That APIM is the re-release version.

I know there can be prerequisites on order of installs such as module A must be installed before module B, but is there any specific reason these were omitted? Was it due to the APIM that is in the 6.2 re-release?

 

[Mike G]

I know there can be prerequisites on order of installs such as module A must be installed before module B, but is there any specific reason these were omitted? Was it due to the APIM that is in the 6.2 re-release?

Not sure. The GFM and OBCC were standalone updates to address specific things but the CMR, SCCM, and APIM are all relating to the update to BC 1.3. I'm pretty confident that the APIM would likely be the next OTA but I could be wrong.

 

[music_cities]

Your vehicle is behind on OTA's. Update 3.5.3 installed on 11/30 after the third time it was sent to your car. Based on the warranty start date and mileage, it seems like you've only had the vehicle a few months. Now that it is being started and driven, I'm sure more updates will come sooner than later. I don't have access to my laptop with FDRS until later, but I'm sure the list of pending updates is a long one. Mike will probably get to you before I can, but if he does not, I will provide you with the list later.

Thanks to you and Mike. Hopefully more OTAs coming soon. It's hard to be patient!

I'm not sure why the warranty start data is August 31 2023 when we didn't sign the deal and take possession until late November; but we were told this, the fact that the warranty was already running is part of the reason for our discount price.

 

[rugedraw]

Thanks to you and Mike. Hopefully more OTAs coming soon. It's hard to be patient!

I'm not sure why the warranty start data is August 31 2023 when we didn't sign the deal and take possession until late November; but we were told this, the fact that the warranty was already running is part of the reason for our discount price.

Being a 2022, they probably had to report the vehicle sold to Ford to claim some kind of factory incentive that they would have lost had they kept the car into September. Or, they were a few vehicles short of hitting a monthly/quarterly goal and reported it sold to get to the quota. It happens a lot.

Sponsored