Post here if you have an active FDRS account and are willing to look up info for others

[66to22GT]

Hello.
I purchased my 22 GTPE today and am amazed by this forum. I had a 66 for 12 years as my daily driver and am glad to be moving back into my mustang roots.
Can someone look up my vin please? I would like to get any recalls or updates prior to our next military move.
Thank you in advance!

3FMTK4SX5NMA47114

Sponsored

 

[rugedraw]

I just got my car a week ago, could someone please tell me whats outstanding? Thanks a lot!

3FMTK3S50PMA92845

No updates have been sent to your car since it was built in September. Unofficial list of modules pending updates is below.

Hello.
I purchased my 22 GTPE today and am amazed by this forum. I had a 66 for 12 years as my daily driver and am glad to be moving back into my mustang roots.
Can someone look up my vin please? I would like to get any recalls or updates prior to our next military move.
Thank you in advance!

3FMTK4SX5NMA47114

The only open recall under this VIN is:

23B50 CHARGE CORD STUCK REPROGRAM BATTERY CHARGE CONTROL MODULE

Vehicle has a very extensive and mostly clean OTA history. For some reason, you car doesn't like CMR updates. You were sent both the bad CMR update (6.13.0) and the good one (CMR-FX) on two different dates, and they both failed due to a manifest mismatch. If you're going to take it to the dealer anyway, tell them you have had two CMR updates fail and hopefully they will do it for you.

 

[66to22GT]

No updates have been sent to your car since it was built in September. Unofficial list of modules pending updates is below.

The only open recall under this VIN is:

23B50 CHARGE CORD STUCK REPROGRAM BATTERY CHARGE CONTROL MODULE

Vehicle has a very extensive and mostly clean OTA history. For some reason, you car doesn't like CMR updates. You were sent both the bad CMR update (6.13.0) and the good one (CMR-FX) on two different dates, and they both failed due to a manifest mismatch. If you're going to take it to the dealer anyway, tell them you have had two CMR updates fail and hopefully they will do it for you.

Thank you so much. I was worried, since I am buying it used from a Chevy dealer. Haha.

 

[Moeyjar]

Just brought mine in for HVBJB replacement and a few modules were updated. Wondering if I can get a fresh scan to see what's remaining. Hopefully I'm up to date for the most part.

VIN: 3FMTK4SX8MME02971

Thanks in advance!

 

[rugedraw]

Just brought mine in for HVBJB replacement and a few modules were updated. Wondering if I can get a fresh scan to see what's remaining. Hopefully I'm up to date for the most part.

VIN: 3FMTK4SX8MME02971

Thanks in advance!

Modules updated were the PCM, BECM, SOBDMC and ABS module. Unofficial list of what is still pending is below:

 

[kennelh]

Could I get a check too - 3FMTK3R75MMA09929 ? I got PU 6.14.0 two weeks ago and was expecting 24-PU0121-FTDI-FX next but haven't received a notification. Someone mentioned they got them back-to-back and never saw 6.14.0, so I'm wondering if mine might have updated the other way around. Thanks.

 

[Robob]

3FMTK3R75MMA09929

 

[rugedraw]

Could I get a check too - 3FMTK3R75MMA09929 ? I got PU 6.14.0 two weeks ago and was expecting 24-PU0121-FTDI-FX next but haven't received a notification. Someone mentioned they got them back-to-back and never saw 6.14.0, so I'm wondering if mine might have updated the other way around. Thanks.

OTA dashboard does not show you have gotten that one yet and you have no OTA in queue at this time.

 

[Blucooper03]

Hey Gang!
Seeking if anyone can check updates and build for my GTPE. FORD CS stated I have an update issue but the dealer hasn’t addressed it twice.
Once I have this info how can I get them to process the updates? My bumper to bumper is now expired as they did nothing for updates on my most recent visit

3FMTK4SX6MME04184

 

[redditn00b92]

Can anyone take a look at VIN: 3FMTK2R75MMA36395? I've been receiving all of the priority updates smoothly but no signs of 6.14 yet. I have a history of not receiving APIM updates OTA and having to do it myself in FDRS. If you see any reason why I may not be getting APIM updates, let me know -- Hoping this time is different. Thanks!

 

[21st Century Pony]

I just returned to town and I'm curious what might updates be in store for this VIN:

3FMTK3SU0NMA14926

 

[rugedraw]

Hey Gang!
Seeking if anyone can check updates and build for my GTPE. FORD CS stated I have an update issue but the dealer hasn’t addressed it twice.
Once I have this info how can I get them to process the updates? My bumper to bumper is now expired as they did nothing for updates on my most recent visit

3FMTK4SX6MME04184

21/1/2021 build date. Last OTA was an ACM update about 9 months ago and Sync 23031 is now two (for some people three) versions behind the latest. Last power-up update was 4.2.4 about 11 months ago. PTS is showing a long list of pending updates, but I would need FDRS to see if you are showing any APIM, GWM or TCU updates which is what you would need to progress to the series of updates. Hard to tell if you have "update issues" or just crappy luck getting updates, but I was a betting man, I would bet on the latter.

Can anyone take a look at VIN: 3FMTK2R75MMA36395? I've been receiving all of the priority updates smoothly but no signs of 6.14 yet. I have a history of not receiving APIM updates OTA and having to do it myself in FDRS. If you see any reason why I may not be getting APIM updates, let me know -- Hoping this time is different. Thanks!

The last power-up you got was 6.4.0, so you most likely need to get a few other 6.x.x updates before that will pop up. That is a very new update that not many have reported getting and probably won't show in FDRS for you even if you had it. I don't think it has been released for anything other than 2023 Mach E's yet, but someone correct me if I'm wrong.

I just returned to town and I'm curious what might updates be in store for this VIN:

3FMTK3SU0NMA14926

No OTA in queue. This is all you show pending in PTS:

 

[21st Century Pony]

21/1/2021 build date. Last OTA was an ACM update about 9 months ago and Sync 23031 is now two (for some people three) versions behind the latest. Last power-up update was 4.2.4 about 11 months ago. PTS is showing a long list of pending updates, but I would need FDRS to see if you are showing any APIM, GWM or TCU updates which is what you would need to progress to the series of updates. Hard to tell if you have "update issues" or just crappy luck getting updates, but I was a betting man, I would bet on the latter.

The last power-up you got was 6.4.0, so you most likely need to get a few other 6.x.x updates before that will pop up. That is a very new update that not many have reported getting and probably won't show in FDRS for you even if you had it. I don't think it has been released for anything other than 2023 Mach E's yet, but someone correct me if I'm wrong.



No OTA in queue. This is all you show pending in PTS:

Thank you!

 

[Blucooper03]

Should I ask the dealer to check FDRS for pending or failed APIM, GWM or TCU updates? I’ll be there Friday for a key program and summer tire swap.

 

[rugedraw]

Should I ask the dealer to check FDRS for pending or failed APIM, GWM or TCU updates? I’ll be there Friday for a key program and summer tire swap.

No, if you had failed updates, I would be able to see that. You can mention to your dealer that you have not gotten any updates in a while and to check for any APIM, GWM or TCU updates pending and to pretty please with sugar on top do them, and they will most likely tell you it's up to date and not do anything.

Sponsored