Door key code

[Hapsdoggen]

Hi

I am trying to figure out how to enter the door key code...

How do i enter a code if it is 3173597 it is not the factory code just and example.

The key pad goes 1-2... 3-4.... 5-6.... 7-8... 9-0

Sponsored

 

[SnBGC]

(3/4)(1/2)(7/8)(3/4)(5/6)(9/0)(7/8)

 

[Hapsdoggen]

(3/4)(1/2)(7/8)(3/4)(5/6)(9/0)(7/8)

Thank you....

Do you also know the ekstra features to lock and open option..?

 

[macchiaz-o]

Thank you....

Do you also know the ekstra features to lock and open option..?

Here are a few of the combinations that work:

https://www.ford.com/support/how-to...keypad/how-do-i-use-securicode-keyless-entry/

To unlock all doors, enter the factory-set code or your personal code, then press 3•4 within five seconds.

To lock all doors, with the driver door closed, press and hold 7•8 and 9•0 at the same time. You do not need to enter the keypad code first.

To release the trunk, enter the factory-set code or your personal code, then press 5•6 within five seconds.

 

[RickMachE]

When it says "press 3/4", that means push that button once.

 

[alexgorod]

Here are a few of the combinations that work:

To unlock all doors, enter the factory-set code or your personal code, then press 3•4 within five seconds.

To lock all doors, with the driver door closed, press and hold 7•8 and 9•0 at the same time. You do not need to enter the keypad code first.

To release the trunk, enter the factory-set code or your personal code, then press 5•6 within five seconds.

To unlock the frunk, press 7/8 after your code

 

[Hapsdoggen]

To unlock the frunk, press 7/8 after your code

There is no option to open the tailgate?

 

[alexgorod]

There is no option to open the tailgate?

I didn't try it, but looks like this: To release the trunk, enter the factory-set code or your personal code, then press 5•6 within five seconds.

 

[Chuck]

How do i enter a code if it is 3173597 it is not the factory code just and example.

That code wouldn't work at all since the code is limited to five digits.

 

[macchiaz-o]

That code wouldn't work at all since the code is limited to five digits.

The OP is in Denmark, where Ford uses longer codes.

 

[Garbone]

Used my code yesterday. It unlocks all doors without extra buttons..

 

[RickMachE]

Used my code yesterday. It unlocks all doors without extra buttons..

Because you have your door locks set to unlock all of them, instead of first the driver's door. Many, including myself, don't do that because it unlocks the other side of the vehicle and someone could enter. That's why Ford gives the option of either.

 

[alexgorod]

I didn't try it, but looks like this: To release the trunk, enter the factory-set code or your personal code, then press 5•6 within five seconds.

Tried it - it didn't open the trunk.

Every door got unlocked after entering the door code, but it might be an option that was set somewhere.

 

[Hapsdoggen]

That code wouldn't work at all since the code is limited to five digits.

Not in the EU it is 7 digits

 

[macchiaz-o]

Used my code yesterday. It unlocks all doors without extra buttons..

It you only want the driver door unlocked, you would need to turn off the option for all doors unlock in SYNC.

Sponsored