stMache - Blu Max

[stmache]

Spring-like weather yesterday in upstate NY so I got the bug to do a couple of Interior Mods I have been holding on to for a few weeks. Excuse the winter grim, did not get the bug to clean.

AOSK Trash Can for Ford Mustang Mach-E (Amazon Link)

AOSK for Mustang Mach-E Armrest Storage Box Organizer Center Console Tray (Amazon Link)

There is a lot of room left open under the storage tray. I used it to put the extra bags for the garbage pouch that came with it.

More to come.

Sponsored

 

[stmache]

This past week, I finally bit the bullet and have ordered a replacement license plate for Max. Last year this plate was not available, this year it is! Should have it in about 4 weeks or so.

My advice for others who want a custom plate, show it to a few people before pulling the trigger. NY allowed my current one (see below). The person's reaction at the NY DOT once she realized why I wanted to change it was hilarious.

 

[macchiaz-o]

This past week, I finally bit the bullet and have ordered a replacement license plate for Max. Last year this plate was not available, this year it is! Should have it in about 4 weeks or so.

My advice for others who want a custom plate, show it to a few people before pulling the trigger. NY allowed my current one (see below). The person's reaction at the NY DOT once she realized why I wanted to change it was hilarious.

Either you forgot to post the original plate at the end of your message, or Administrator removed it for lewdness. (I will always remember the original, Scott!) Either way, I am VERY HAPPY for you to finally get BLU3 MAX.

 

[stmache]

Either you forgot to post the original plate at the end of your message, or Administrator removed it for lewdness. (I will always remember the original, Scott!) Either way, I am VERY HAPPY for you to finally get BLU3 MAX.

The current plate is in my signature. I forget some people may have that option turned off. Here it is....

 

[stmache]

New plates came in and I put the rear one on right away.

It was too cold (~40F) to put on the Craig's bracket to the front. Have to wait for a good stretch of 60F+ weather later this month or May.

 

[stmache]

My rite of Spring, picking up the 2017 Ford Mustang Ecoboost called Genie from Winter storage. First time with the help of Max.

 

[stmache]

With Genie home (see previous message), Max stays outside until late Fall. With rain and possibly snow in the forecast, it gave me a chance to use the MYCAPUCHE Plug Cover for the Mach-e.

Goes on with velcro. The blue color option was a good match for Infinite Blue.

Snugged it around the charging cord to cover the CCS plug.

Velcro strap uses the Driver's side windshield wiper to anchor it.

 

[stmache]

Pony Side Graphic by AutoDesign Shop in Silver. Will get better photos once the weather improves.

Installed by Absolute Detail near Syracuse, New York in April of 2022.

 

[stmache]

AOSK for Mustang Mach E Rear Spoiler (Glossy Black)

The whole idea here is for looks as this spoiler is not functional and I am hoping this spoiler will help keep rain off the backup camera. Will report back if it does or not.

UPDATE: I drove in a lot of rain today and when I backed up, no water drops on the camera. Will continue to monitor but looks promising so far.

This was installed by my detailer at the same time as the Pony graphic (see post before this one).

This one is NOT the V2 version as when I ordered it, V2 was not an option.

A bit dirty here as the ceramic coating was still curing. Will replace with better ones in the future.

I added a bit of processing to bring out more details you see below.

 

[Murse-In-Airy]

@stmache did you ever get your Craig’s custom plate bracket installed? I just received mine and I’m wondering if you had any sensor problems.

 

[stmache]

@stmache did you ever get your Craig’s custom plate bracket installed? I just received mine and I’m wondering if you had any sensor problems.

I had one on last year. I found I needed to make sure the plate was as close as possible to the bumper or it would cause the front middle sensors to come on at low speeds.

Once I get my Mach-e back from the dealer, I will be putting it back on since the temps will stay above 60 now.

 

[Murse-In-Airy]

Got mine installed.
No sensor problem and it allows my front stripes to be seen below the nose cone enough to tell that there is a line of body below the “grill”. The factory bracket just made it all look like on big blob there. And the Sto N Sho was way too lo fo sho.

 

[stmache]

Technically not a modification as this was a promised update but finally got Max updated to a 2022 spec software-wise including BlueCruise.

Found out it didn't like me taking too long to take photos.

 

[robbinbadams]

Back from vacation and putting more miles on the odometer this past week. Got the first 300+ mile estimated range on a full charge today on my RWD Extended Range Premium.

I suspect this will only increase during the next few weeks of summer weather.

I’ve been there and done that in my icbe errw premium. Got at least 325. It’s great.

 

[GreaseMonkey]

Got mine installed.
No sensor problem and it allows my front stripes to be seen below the nose cone enough to tell that there is a line of body below the “grill”. The factory bracket just made it all look like on big blob there. And the Sto N Sho was way too lo fo sho.

Looks great. Did you run into any issues with the stripes or vinyl wrap? The Craig's web site recommends against installing the 3M tape over these materials. Just wondering cause I'm interested in doing the same.

Sponsored