What have you 3d Printed?

[ricojm]

I haven't but our fellow member OhmsLaw printed a pair of very nice little trunk cargo net retainer clips for several of us. These 3D clips keep the cargo net rod from popping loose off the rear hatch brackets. Unfortunately after 8 months of constant use I just broke one of them grrr... he's got a now inactive thread about them hereabouts.

And nearly 2 years ago another member whose name now escapes me printed a very nice charging cover retaining strap which keeps the charging cover from denting the side panel of the car. I still use mine.

Hi Martin, try this guy on etsy for cargo clip, very nicely made and have not had issues like the one from Ohmslaw, look him up as:
Bezaleddesigns

Sponsored

 

[HuntingPudel]

I didn’t print it myself, but I paid to have the charge port door travel limiter 3D printed. I also paid to have the cargo cover retainers printed. Back in the ‘90s we often had rapid prototypes printed off of our Pro/E files. ??

 

[21st Century Pony]

Hi Martin, try this guy on etsy for cargo clip, very nicely made and have not had issues like the one from Ohmslaw, look him up as:
Bezaleddesigns

?

 

[Old_Norm]

They go inside the bracket of the charge port door to prevent them from hyper extending and denting your front 1/4 panel.

https://www.thingiverse.com/thing:4967291

I mentioned before that that part could lead to a big problem. I printed it in PETG and tried to install it on the door hinge. It broke and became lodged in such a way that the port door would not open more than an inch or two. It took me an hour or more to get it out. I'm not blaming the creator. It was probably something I did incorrectly when installing the part. Just FYI.

 

[Kismit]

I mentioned before that that part could lead to a big problem. I printed it in PETG and tried to install it on the door hinge. It broke and became lodged in such a way that the port door would not open more than an inch or two. It took me an hour or more to get it out. I'm not blaming the creator. It was probably something I did incorrectly when installing the part. Just FYI.

I printed it in TPU and have been using it for almost two years now without an issue

 

[DoubleDribble]

prevent them from hyper extending and denting your front 1/4 panel.

Actually called a "fender". Hence the phrase fender bender. 1/4 panels are always at the rear of the car.

 

[Kismit]

Actually called a "fender". Hence the phrase fender bender. 1/4 panels are always at the rear of the car.

Thanks apparently I've been wrong about this forever! Learned something new today!

 

[SashaLondon]

Hi does anyone have the file for 3d printing the cargo cover clip? I have lost one of the black plastic parts as they constantly come apart.

 

[Old_Norm]

Hi does anyone have the file for 3d printing the cargo cover clip? I have lost one of the black plastic parts as they constantly come apart.

https://www.thingiverse.com/thing:5198253

 

[SashaLondon]

Thank you I meant the actual two part bracket that fixes the cloth cover to the car. If anyone has a link or file on how to get this?

 

[Tawna]

https://makerworld.com/en/models/690591?from=search#profileId-619339

 

[Old_Norm]

https://makerworld.com/en/models/690591?from=search#profileId-619339

Printing now.

 

[OH2AZ2OH]

I printed of few of the low poly Mustangs, but getting the supports out between the legs is a hassle. I had better luck splitting the model in half and then gluing the two sides together. Resin printing would be better for those. Here's the link:
https://www.thingiverse.com/thing:3931883

Not MachE related, but I printed this toggle switch lock that works great:
https://www.thingiverse.com/thing:69806
The outlet my phone charger is plugged into a switched outlet and I got sick of waking up to a not-charged phone when the wrong switch got flipped.

I also printed some inserts for my Costco solar path lights so that I replace the LED pucks with a more standard size.

Other than that, my 3D printer has been a dust collector.

 

[Luke]

I used this print here as an excuse to get a printer: https://www.macheforum.com/site/thr...nt-prevention-–-3d-printed-diy-solution.5812/

If you look at Bambu’s makeworlrd you will see some good stuff there. There is an Apple mag charger tray to replace the center console charging. It works great too.

 

[Jeff-NoVA]

They go inside the bracket of the charge port door to prevent them from hyper extending and denting your front 1/4 panel.

https://www.thingiverse.com/thing:4967291

Unless you have a '21 I don't think you need one. The door on my 22 doesn't go that far back.

Sponsored