Post here if you have an active FDRS account and are willing to look up info for others

[ahern149]

@Mike G mind checking what new goodies have come out for my vehivle?
Vin 3FMTK1SS2MMA19966

Sponsored

 

[Mike G]

my dealer said they conducted the CSP to install bluecruise, but when i went to look at it, my driver assistance settings did NOT say "hands free lane centering", just "lane centering"

is there a way in FDRS to make sure everything was installed?

i'll state in advance i can't just go on the freeway to test it for a variety of reasons, one of which is that my car's GPS is not working, but i just don't want to have to go back to dealer separately for the bluecruise topic assuming they ever manage to fix the GPS...

Well the GPS would be necessary for the BC to function anyway.

And you have an APIM update waiting to be installed.

Mike

 

[Mike G]

@Mike G mind checking what new goodies have come out for my vehivle?
Vin 3FMTK1SS2MMA19966

You're in the same boat as @methorian

HVAC, powertrain tweaks (again), and the reversion of the door modules to the previous "-AH" version:

 

[flapjake314]

Well the GPS would be necessary for the BC to function anyway.

And you have an APIM update waiting to be installed.

Mike

yeah i know so the car's still with the dealer to fix GPS but they said they already finished BC.

they actually told me both were already fixed and i went to pick it up and i saw GPS was still broken so i left it there again. however when i was checking i also noticed the aforementioned issue with BC, if the option for "hands free lane centering" doesn't show does it mean they didn't properly install it?

they don't really know what they're doing but i also don't know if the install is truly complete or not...

 

[Mike G]

yeah i know so the car's still with the dealer to fix GPS but they said they already finished BC.

they actually told me both were already fixed and i went to pick it up and i saw GPS was still broken so i left it there again. however when i was checking i also noticed the aforementioned issue with BC, if the option for "hands free lane centering" doesn't show does it mean they didn't properly install it?

they don't really know what they're doing but i also don't know if the install is truly complete or not...

No you're absolutely right..it needs to have that Hands-free option or it's not fully baked.

 

[ahern149]

You're in the same boat as @methorian

HVAC, powertrain tweaks (again), and the reversion of the door modules to the previous "-AH" version:

Would there be any benefits to getting these done or should I just wait it out for the HVAC one which should be 3.6.1?

 

[mrguyana]

@Mike G
Do you mind checking there’s anything outstanding
Vin 3FMTK2SU5NMA17282

 

[Mike G]

@Mike G
Do you mind checking there’s anything outstanding
Vin 3FMTK2SU5NMA17282

30 Mar '22 build date.

Here's the list of available updates:

So it's the powertrain set (PCM, SOBDM, SOBDMB, SOBDMC, BECM), the body controller (BCM), Driver's seat module (DSM) and the phone charger (WACM).

ETIS says there are two open field service actions for your car:

These may or may not apply. If you've gotten the OTA 3.6.1, your HVAC got updated (it's not in the list above so maybe you got that by OTA?), and if your maps are set to expire in April '23 you should be good.

Mike

 

[shark]

Can someone please check my vin and post available updates for my MME?
3FMTK4SE1MME02986

Also, is there anyone in the DFW area that is willing and able to install updates for a fellow MME owner? My dealer wants me to leave my car onsite for 2-3 weeks before they can get to it

 

[Mike G]

Can someone please check my vin and post available updates for my MME?
3FMTK4SE1MME02986

Also, is there anyone in the DFW area that is willing and able to install updates for a fellow MME owner? My dealer wants me to leave my car onsite for 2-3 weeks before they can get to it

Here's your list:

 

[MN Mach E]

I

’m a bit curious about my car’s current status. I had it in the dealer in November and they said it was all up to date, including the recall but, I received another notice in the mail about the recall last week.

3FMTK3SS4NMA11770 …

Thank you in advance.

 

[Magnamover]

same same here, thanks Mike VIN# 3FMTK4SX8MME02453

 

[mrguyana]

30 Mar '22 build date.

Here's the list of available updates:

So it's the powertrain set (PCM, SOBDM, SOBDMB, SOBDMC, BECM), the body controller (BCM), Driver's seat module (DSM) and the phone charger (WACM).

ETIS says there are two open field service actions for your car:

These may or may not apply. If you've gotten the OTA 3.6.1, your HVAC got updated (it's not in the list above so maybe you got that by OTA?), and if your maps are set to expire in April '23 you should be good.

Mike

Appreciate it @Mike G have an appointment with the dealership this morning to troubleshoot my 2nd “Stop salty now” warning.

 

[Mike G]

I

’m a bit curious about my car’s current status. I had it in the dealer in November and they said it was all up to date, including the recall but, I received another notice in the mail about the recall last week.

3FMTK3SS4NMA11770 …

Thank you in advance.

1 Mar '22 build date.

Here's the list of available updates:

So a refreshed set of the powertrain modules, the BCM, DSM, HVAC, and wirelss charge pad updates.

Mike

 

[Mike G]

same same here, thanks Mike VIN# 3FMTK4SX8MME02453

20 Sep '21 build date, Job 2 car, (GT-PE)

FDRS shows this car having zero service history.

Here's your list of available updates:

And here's what ETIS shows:

So you've never gotten the 22S41 recall, never had your HVJB replaced...and never went in for all the free updates under CSP 21P22 (funding for that program has now expired).

Sponsored