How To: Enable Power Meter on Non-GT Mach E

[737flyer]

I just downloaded forscan direct from their website. Is there a newer version than what the standard download link goes to?

If you downloaded from their site you should have the latest software

Sponsored

 

[redgrandam]

If you downloaded from there site you should have the latest software

I think my reader doesn’t support HS-CAN. The one I ordered does MS/HS-CAN auto switching. So hopefully this is problem.

 

[redgrandam]

Incase anyone reads this down the road, it ended up being the adapter. I got the Vlinker FS USB and it worked perfectly right away for all the modules.

 

[HarrisonFord]

Confirming this method now works on another 2021 Job 1 Select after 6.8.0 a few days ago.

 

[spicy_taco]

Just enabled it on my 2023 Premium. After enabling it, my Motion Sensor Alarm prompt returned.

Also, I noticed Forscan has it in the non-As Built section as well: "EV Power Meter"

 

[azerik]

I'm going to have to try this again. I don't have the 6.8 (and appear to once again be stuck in OTA jail) but I did update everything via FDRS so who knows, worth a shot.
Color me surprised, but it didn't work. I don't have the 6.8 screens so whatever, guess I'll keep my centered speedo.

 

[360alaska]

Here is an idea of what you're looking at based on my knowledge:

My car was on Job 1 until the 6.8.0 update was released. I had to force the update with FDRS as it failed repeatably.

 

[smokin5s]

Car went into the dealership and they ran an update, now my power meter is all gray bars except when charging... any idea on how to resolve? 22 Premium

 

[dtbaker61]

in case you can't get the power 'meter' to show up again... you might consider the ODB2 + CarScanner App custom dashboard you can display on your phone.....

https://www.macheforum.com/site/thr...r-output-regen-charging-and-other-data.33211/

 

[azerik]

Here is an idea of what you're looking at based on my knowledge:

My car was on Job 1 until the 6.8.0 update was released. I had to force the update with FDRS as it failed repeatably.

Speedo in the middle 24+ must only be when in Park. I'm still on 6.3 so I have little to complain about other than the inability to turn on said meter.

 

[Jeff-NoVA]

FWIW this mod seems to be broken with latest round of updates - it now shows jail bars on the right side of the meter. I am only visiting this thread again to remind myself how to disable the power meter.

Car went into the dealership and they ran an update, now my power meter is all gray bars except when charging... any idea on how to resolve? 22 Premium

I don't believe anybody has figured out how to fix this issue.

 

[Trick.Mach-E]

FWIW this mod seems to be broken with latest round of updates - it now shows jail bars on the right side of the meter. I am only visiting this thread again to remind myself how to disable the power meter.



I don't believe anybody has figured out how to fix this issue.

Same issue for my Mach-E. I finally ran all updates in FDRS and found the same. I attempted to re-write the code and no fix. Looking to disable but can't find anything.

 

[Jeff-NoVA]

Same issue for my Mach-E. I finally ran all updates in FDRS and found the same. I attempted to re-write the code and no fix. Looking to disable but can't find anything.

In Forscan go to the IPC - not as built - and set EV power meter to disabled.

 

[McSquashy]

FWIW this mod seems to be broken with latest round of updates - it now shows jail bars on the right side of the meter. I am only visiting this thread again to remind myself how to disable the power meter.



I don't believe anybody has figured out how to fix this issue.

Do you know which update it was that nerfed the power meter?

 

[Jeff-NoVA]

Do you know which update it was that nerfed the power meter?

I don’t know for sure which one did it, but my most recent round of updates included the APIM and all of the modules for the battery and charging system.

Sponsored