Post here if you have an active FDRS account and are willing to look up info for others

[RSch55]

Hello, I took delivery of my Mach-E 12 days ago.
Mostly all good so far!

The front camera has just started to malfunction and then fixes itself within a few minutes.
Not sure if this is software related or not.

Would be very grateful if somebody was able to do a check on my VIN before I arrange for a dealer to look into the issue.
My VIN is WF0TR3R76RMA11904

Thank you

Sponsored

 

[crl]

TSB 24-2251 for the IPMA does apply to your issue.

Thank you!

 

[Mike G]

Hello, I took delivery of my Mach-E 12 days ago.
Mostly all good so far!

The front camera has just started to malfunction and then fixes itself within a few minutes.
Not sure if this is software related or not.

Would be very grateful if somebody was able to do a check on my VIN before I arrange for a dealer to look into the issue.
My VIN is WF0TR3R76RMA11904

Thank you

Lots of DTCs for the CMR and IPMA (your collision assist issues) and even a couple on the BECM.

Here's the list of available updates and some might be very helpful:

That GWM (gateway) update should be performed before they do anything else.

And then because of the DTCs you have recorded:

I'd follow that with the powertrain updates, (PCM, ABS, BECM, SOBDM, SOBDMC, all scripted to update together), then the CMR (before doing the IPMA), then IPMA and the BCM. The ACM is just the radio module, so if that's working fine you can skip it.

 

[RSch55]

Thank you for your help @Mike G - I'll get in touch with the dealer and get this sorted.
Much appreciated.

 

[danielcb]

Hi @Mike G

When you have the chance, can. You check mine? Do I have a DSP update available (really wanted to use Beosonic)?

3FMTK3SU1NMA25157

I believe that the last update the car tried to install was the GWM, which failed. In the car screen it says that Ford will send the update again at a latter date but it’s been two months in this stage. Can Dealerships do the updates upon customer request?

Thank you!

 

[mach-e-mach]

Thank you!

 

[Jefke77]

Hi, good evening all.
I hope someone can check availability for updates for me?
WF0TK3SUXMMA63601
Hoping blue cruise update is available for the car.
Thanks in advance. ?

 

[Dw0413]

Hi. Would be grateful if someone could check 3FMTK3SU4MMA36930.

I updated everything recently in FDRS but wondering if the updates that enable Google Maps battery % and/or FordPass climate control details have been made available to my 2021 J1 since then.

 

[PianoDan0]

That is something I am curious to myself. You are not the first person on the forum to report BC took a turn for the worse with the latest IPMA update(when going from the ACJ version from December compared to the BAE version for BC 1.3), but there are others who swear it is better.

Good to know I didn't mess anything up, and I'm not the only one experiencing it. It's definitely noticeably worse for me. It disengages more often on curves in the road too and even when it is still active around curves it feels more like lane keep assist rather than lane centering. It'll sort of "bump" the line, straighten out a little, bump the line again, and so on. Before it used to just stay in the middle with very little adjustments, definitely didn't get as close to the line as it does now.

Anyone find anything that can be done about it or do we just wait until another IPMA update and hope it gets fixed?

 

[rugedraw]

Good to know I didn't mess anything up, and I'm not the only one experiencing it. It's definitely noticeably worse for me. It disengages more often on curves in the road too and even when it is still active around curves it feels more like lane keep assist rather than lane centering. It'll sort of "bump" the line, straighten out a little, bump the line again, and so on. Before it used to just stay in the middle with very little adjustments, definitely didn't get as close to the line as it does now.

Anyone find anything that can be done about it or do we just wait until another IPMA update and hope it gets fixed?

I doubt there will be any newer IPMA software than this one released any time soon. They just released this BAE version to the F150's today.

 

[PianoDan0]

I doubt there will be any newer IPMA software than this one released any time soon. They just released this BAE version to the F150's today.

So I guess we just wait (a while). I wasn't sure if there was some recalibration procedure or anything else I could do to fix it.

 

[NeonMustang]

TYIA
3FMTK2R73MMA36525

 

[rugedraw]

So I guess we just wait (a while). I wasn't sure if there was some recalibration procedure or anything else I could do to fix it.

You can try the IPMA calibration.....it won't hurt. If it doesn't help, message me. There's always a black-market fix.

 

[PianoDan0]

You can try the IPMA calibration.....it won't hurt. If it doesn't help, message me. There's always a black-market fix.

I'll grab a FDRS license and try calibration. Appreciate the help and input as always!

 

[rugedraw]

I'll grab a FDRS license and try calibration. Appreciate the help and input as always!

You can do that with FORScan.

Sponsored