Post here if you have an active FDRS account and are willing to look up info for others

[Mike G]

VIN: WF0TR3SU2MMA28322

Thanks for looking these up for everyone, it is a great and really helpful idea.

I have recently got a secondhand AWD Extended range 2021 MME in the UK. I did spot on this forum the recall for the breaking system update, which my dealer did for me on request. I have an extended warranty and so thought it would be wise to check what else needs updating. Also I have heard the 12V battery is prone to failure at 3 years and so it would be good to know its status. Please can I ask for one of you fine fellows to run a check?

Does anyone know what updates are usually OTA in the UK? I assume I have the control module update thingy as I can open the frunk (although in the UK it is a boot and not a trunk, so foot with the oo pronounced as in boot) using the keypad. Strangely it seems we have less buttons on our keys. I’m not sure why it can’t open like the boot, but I guess there anre regulations on how the Additionally PAAK does not seem to be an option, nor using the access code to start the car.

Many thanks

So you probably have a key fob from a early 2020's Ford Fiesta (or similar). That's because of the UK insurance regulators not wanting you to risk getting your car stolen by having a transponder key that somebody could use a signal booster on from outside your house, to steal your car (without ever going in to your house at all).

You have a shed-load of updates that will only appear when the prerequisite module updates have been applied.

Case in point. That APIM (Sync) update in your list below. When that gets applied it will unlock the ability to update a GWM (gateway module), and on and on in a similar fashion until your car is 'walked forward' to the currently permitted revision of Sync for the UK market. (This is all listed in the "Additional Updates" note.)

It is entirely possible, if not very probable, that the backlog you see in this list is the very reason you aren't getting any OTAs.

Sponsored

 

[cwhite51]

Hi, could someone check 3FMTK4SXXNMA01827 please? Thank you!

 

[Francisco]

Hello,

Can you check my 2021, I have been getting the driver facing camera fault notification frequently and the reverse brake assist not available notification every time when put in reverse. I relearned the sterring center but the message returns. I plan on taking it in to the dealer.

VIN: 3FMTK3SU6MMA07798

 

[kennelh]

When time allows, please look up 3FMTK3R75MMA09929. I finally got an OTA after forever so wondering what now is still pending. Thanks.

 

[Woeo]

You aren't the only one with an ACM GVMS warning. I've seen that several times this week. Don't worry about it.

I hopped in today and was pleased to see BC 1.3 update had installed in my 21J1 overnight. (even though 12v had not been above 80% for a while) Without my having done anything with FDRS.

 

[Helly]

Hello,

is it possible to tell me which update is available for my car .

many thanks

Mickael

 

[Mike G]

Hi, could someone check 3FMTK4SXXNMA01827 please? Thank you!

Here's the list of available software updates in FDRS:

Basically, a set of powertrain updates, and a gateway (GWM) update. When the gateway is updated, it will unlock the next Sync (APIM) update, and when that is updated, it will unlock the next TCU modem update. 12V battery says it's at 89% SOC, so no problems there. No OTAs currently in the queue for your car.

 

[Mike G]

Hello,

Can you check my 2021, I have been getting the driver facing camera fault notification frequently and the reverse brake assist not available notification every time when put in reverse. I relearned the sterring center but the message returns. I plan on taking it in to the dealer.

VIN: 3FMTK3SU6MMA07798

You just got the giant BlueCruise 1.3 OTA update on the 13th of Dec. It updated the CCM, CMR, IPMA, and PSCM. It's possible that is the reason your Driver's camera module (CMR) is reporting occasional errors.

Also, is there a possibility that your car has engineering analytical tokens installed for testing? At least two of the DTCs mention this in the related SSMs that are connected to them.

Here's the list of available software updates in FDRS:

 

[Mike G]

When time allows, please look up 3FMTK3R75MMA09929. I finally got an OTA after forever so wondering what now is still pending. Thanks.

You got the BC 1.3 update via OTA.

It gave you a CCM DTC (briefly) but it's historical now and not an active fault.

Here's the list of available software updates in FDRS:

Lots of GVMS warnings this morning. I got them today too on my Lightning for some reason.

 

[Mike G]

Hello,

is it possible to tell me which update is available for my car WF0TK3SS7PMA41929 .

many thanks

Mickael

OTA 6.14 (APIM) has failed two times in a row.

Here's the list of available software updates in FDRS with "Additional Updates" note at the bottom.

So check with your service advisor to see if they will update the APIM, IPC, GWM, APIM, etc. using FDRS since your OTA process failed twice.

 

[JJack6]

Interested to see what updates or OTAs are available for my 2021. Excited for B.C. 1.3. Will be doing my own updates soon once I get the tools

3FMTK3SU8MMA36865

 

[Mike G]

Interested to see what updates or OTAs are available for my 2021. Excited for B.C. 1.3. Will be doing my own updates soon once I get the tools

3FMTK3SU8MMA36865

Here's the list of available software updates in FDRS this morning:

Don't know what's going on with all the GVMS warnings I'm seeing this morning. A bit weird. They must be up to something in Dearborn. Shenanigans.

 

[CarGuy11]

I'm guessing no love for 2022s before the holiday. Thx! 3FMTK3SU9NMA41574

 

[Mike G]

I'm guessing no love for 2022s before the holiday. Thx! 3FMTK3SU9NMA41574

Maybe you'll get a Mongoose for Christmas?

 

[Trekkie101]

WF0TR3SU0MMA19392

Does it show anything on OTA status for today/yesterday/this week?

I saw an incomplete message on the software update screen that disappeared and then later got a “Drive Mode Unavailable” message - but it then allowed me to select them again without issue. Possibly a module update while I was driving?

Sponsored