Post here if you have an active FDRS account and are willing to look up info for others

[Wizmo]

Just bought '22 GTPE from Carvana. Door sticker says built 07/22.
VIN 3FMTK4SXXNMA30907
Ford recall checker says none active. Carfax reports original sale,
no dealer maintenance ever, only owner registration/renewal and
eventually sale to Carvana. Anything worth spending money to
try and get updated?

Sponsored

 

[Mike G]

Just bought '22 GTPE from Carvana. Door sticker says built 07/22.
VIN 3FMTK4SXXNMA30907
Ford recall checker says none active. Carfax reports original sale,
no dealer maintenance ever, only owner registration/renewal and
eventually sale to Carvana. Anything worth spending money to
try and get updated?

Build date is 19 July '22.

Here's the list of available software updates in FDRS for this VIN:

Your next OTA should be 10.1.1 (TCU in the list above). You will not see any noticable changes since it is a TCU update.

 

[Trekkie101]

It's not queued as an OTA yet...but that could happen later this week I guess.

Car came back from recalls. No real issues.

FordPass got spammed with 12v errors but I was asking them to get me a new one - so I figure possibly there’s a test they run. 12v seemed fine when I hooked it up at home.

Ran the TCU update, full success, went to do a clear and retest and everything went purple. Hit it again and it told me an OTA was in progress.

Checked OTA on PTS - nothing appeared.

Went back to FDRS and another TCU had popped up. Did that one too and all green again.

A bit wonky but all done successfully - didn’t require USB, it was more like it was configuring the module, over in less than a minute in each session.

Odd but done

 

[Wizmo]

Build date is 19 July '22.

Here's the list of available software updates in FDRS for this VIN:

Your next OTA should be 10.1.1 (TCU in the list above). You will not see any noticable changes since it is a TCU update.

Thanks for checking these.

 

[MachEUser]

I just had the hvbjb changed. The dealer told me they did some updates. In sync, it is saying bluecruise 1.3 is not completed. Which updates did they do?

Does this mean this is next update once it is downloaded but it’s weird to see all sudden? I would love to get bluecruise 1.3.

Vin: 3FMTK3R79MMA27138

Thanks for your help.

 

[rugedraw]

I just had the hvbjb changed. The dealer told me they did some updates. In sync, it is saying bluecruise 1.3 is not completed. Which updates did they do?

Does this mean this is next update once it is downloaded but it’s weird to see all sudden? I would love to get bluecruise 1.3.

Vin: 3FMTK3R79MMA27138

Thanks for your help.

Unfortunately, "not completed" means the OTA attempt failed. It was cancelled by the server on 1/29 which is the same day the update was sent to you citing "cancel reason 13"......whatever that means. Nothing you can do at this point but wait for it to be resent.

 

[FloridaWolverine]

Hi everyone! Just switched over from a Lightning and got a 24 Mach E from the lot. I just wanted to check if there were a lot of software updates I needed to grab that got missed while it was just sitting there. I remember my 22 lightning needed an FDRS update run and then everything started downloading regularly. Here's my VIN if anyone is available to run a quick check. Thanks so much for any help!!

3FMTK1SU3RMA52032

 

[rugedraw]

Hi everyone! Just switched over from a Lightning and got a 24 Mach E from the lot. I just wanted to check if there were a lot of software updates I needed to grab that got missed while it was just sitting there. I remember my 22 lightning needed an FDRS update run and then everything started downloading regularly. Here's my VIN if anyone is available to run a quick check. Thanks so much for any help!!

3FMTK1SU3RMA52032

Not much showing:

 

[FloridaWolverine]

Not much showing:

Thanks! I wonder if that IPMA update is similar to the one they did on my lightning that completely fixed Bluecruise lane finding. I feel like the mach e ping-pongs way more on 1.3 than my lightning did on whatever 1.0ish version it was on, but could just be that I feel it more with the tighter steering. Thanks so much for the check @rugedraw !!

 

[rugedraw]

Thanks! I wonder if that IPMA update is similar to the one they did on my lightning that completely fixed Bluecruise lane finding. I feel like the mach e ping-pongs way more on 1.3 than my lightning did on whatever 1.0ish version it was on, but could just be that I feel it more with the tighter steering. Thanks so much for the check @rugedraw !!

I didn't check what version the IPMA was on, but I'll look into it tomorrow. Weird that it's showing an IPMA and not a PSCM also, but stranger things have happened, I guess.

 

[kens]

I wanted to check the 12V Battery SOC this morning for you but can't. When the original owner traded the car in neither they or the dealer have so far gone into Sync and performed a "Factory Reset" (used to be called a Master Reset) to clear out the owner's settings and customizations. As a result, the car is currently not displaying any reported info. This will resume just as soon as the factory reset is performed and you have setup FordPass and associated it with this car as the new owner.

Finally got the new old car out of recall jail, brought it home today. Now that it is set up in my FordPass would you mind checking again how this looks?

3FMTK4SE6NMA08126

While playing with settings it said I was getting an update, not sure which, but I know I'm up to 10.1.0, and Bluecruise 1.3 worked well on the way home. I did not do a factory reset myself, but saw no trace of other phones, etc, but if needed I can do the reset tomorrow. I did get my Paak set up, and new codes set.

 

[Mike G]

Finally got the new old car out of recall jail, brought it home today. Now that it is set up in my FordPass would you mind checking again how this looks?

3FMTK4SE6NMA08126

While playing with settings it said I was getting an update, not sure which, but I know I'm up to 10.1.0, and Bluecruise 1.3 worked well on the way home. I did not do a factory reset myself, but saw no trace of other phones, etc, but if needed I can do the reset tomorrow. I did get my Paak set up, and new codes set.

That OTA on the 6th was indeed the BC 1.3 and Public Charging update.

You should be getting OTA 10.1.1 for the TCU next (the TCU is in your list below):

 

[kens]

You should be getting OTA 10.1.1 for the TCU next (the TCU is in your list below):

Thanks. I have the impression 10.1.1 comes fairly quick...

Anything in that long list I should concern myself with, or just let them come as they may?

 

[Mike G]

Thanks. I have the impression 10.1.1 comes fairly quick...

Anything in that long list I should concern myself with, or just let them come as they may?

Just enjoy the car.

 

[Cjpayne]

I took my car to the dealership on Tuesday for new tires and alignment. I was told that during the alignment they had to turn the car on to put it in neutral and left the power on but did not hook up a power supply. So the LVB got too low and threw codes and locked the car in neutral. They claimed to have updated modules PCM, BECM, SOBMB and SOBOMC. Also found TSB 22-2490. Can someone run my VIN to see if I need a 2 day license to clean up anything? FMTK4SE2MME00387. Thanks.

Sponsored