Charge Port Cover Dent Prevention – 3D Printed DIY Solution

[Larry]

Canceled and reordered using the MME_Charge_Port_Dent_Protector_V.1.N.stl file.
Thanks.

By the time the dust settles on all this I’m going to know a lot more about 3D printing than I did before. Heck, I may even think about getting one.

Sponsored

 

[Stang68]

What do you guys think about long-term damage to the charge door with this 3D printed item installed?

 

[Scarpia]

If I thought there was any possibility of damage, I wouldn't use it.
I'm using it.

 

[AjzRide]

I shipped out the updated revision today to everyone who got one from me. This version includes the tweaks I made so that the thin walls worked better with my 0.8mm nozzle. Should fit much smoother now and not cause any binding on the door.

 

[ChasingCoral]

I shipped out the updated revision today to everyone who got one from me. This version includes the tweaks I made so that the thin walls worked better with my 0.8mm nozzle. Should fit much smoother now and not cause any binding on the door.

I look forward to trying it!

 

[AEtherScythe]

Hot off the press, if you'd like to get the highest quality possible part with the black vapor finish, you can now just go here and place an order with JawsTec.
$20 plus $10 shipping on quantity one.

https://www.jawstec.com/product/wedge-mme-chargeport-door/

 

[bairdc3]

$10 shipping? That is just hurtful.

 

[markystarky]

Just ordered mine.

 

[KCole21]

Hot off the press, if you'd like to get the highest quality possible part with the black vapor finish, you can now just go here and place an order with JawsTec.
$20 plus $10 shipping on quantity one.

https://www.jawstec.com/product/wedge-mme-chargeport-door/

Thanks for everything you did with this and for keeping everyone informed. You were definitely a man of his word. I’ve been checking on this since you posted back in April waiting for the website to have a direct link just to make it easier. I just placed my order and I’ll patiently wait for it now.

 

[MrRongoose]

We should put together a bulk order and have the person ordering mail them out ourselves. Probably can stick it in a standard envelope

 

[Cjpayne]

Do I need to order the inserts?

 

[AEtherScythe]

Do I need to order the inserts?

There is just one thing to order; it's all-in-one with the tabs/wings being in-built.

 

[Cjpayne]

There is just one thing to order; it's all-in-one with the tabs/wings being in-built.

Thanks!

 

[zvez]

Hot off the press, if you'd like to get the highest quality possible part with the black vapor finish, you can now just go here and place an order with JawsTec.
$20 plus $10 shipping on quantity one.

https://www.jawstec.com/product/wedge-mme-chargeport-door/

So just to clarify, the $20 is for the actual part, not the print file?

 

[machefan]

So just to clarify, the $20 is for the actual part, not the print file?

Correct, the print file is free and already posted prior.

You order and you get delivered a dent prevention 3D printed piece. No instructions, you need to see the first post here for how to install it.

Sponsored