Post here if you have an active FDRS account and are willing to look up info for others

[Mike G]

Picked up my car last week after getting out of recall jail, but wondering if anything else is pending. 3FMTK3R79NMA20532

Thanks.

Yup....

You can read back a bit to get an idea of what you may need to tell your service advisor to get these applied as warranty labor updates.

Sponsored

 

[pnrmurph]

Yup....

You can read back a bit to get an idea of what you may need to tell your service advisor to get these applied as warranty labor updates.

Great. Thanks so much!

 

[Malacandra]

Well it looks like updates that would comprise the recall are available, but I can't speak to what versions would be applied based on the "tooltips" of these module updates.

So I would be looking out for an OTA if you do routinely get those. Or have a discussion with your service department...either way.

Thanks so much!

I have a 2021 Job 2, and the only OTA update I've ever seen so far were maps for Blue Cruise, but I've been hoping that since there are active recalls that I'd get those. But they keep not showing up.

 

[rohankumar]

OTAs are highly overrated and do not cover a lot of the things in this list (yet):

Best,

Mike

I had some updates pushed through earlier today and system updates screen has changed to stating the vehicle is up to date instead of the BlueCruise updates that I had been seeing for months. Can you run a quick check on VIN # 3FMTK3R72MMA62801 at your convenience to see what was pushed through and what I still need to work on with my dealer?

I apologize for asking for assistance again but I am worried that the BECM updates didn't come through possibly.

 

[Mike G]

I had some updates pushed through earlier today and system updates screen has changed to stating the vehicle is up to date instead of the BlueCruise updates that I had been seeing for months. Can you run a quick check on VIN # 3FMTK3R72MMA62801 at your convenience to see what was pushed through and what I still need to work on with my dealer?

I apologize for asking for assistance again but I am worried that the BECM updates didn't come through possibly.

As of two minutes ago:

Mike

 

[rohankumar]

Thanks for checking on this, no changes basically even though the update status changed on the screen ?‍

 

[Southern92]

VIN: 3FMTK4SX5NMA21578
Not sure of exact build date, but before May 24th. Delivered to dealer June 2022 & was "un-sellable" due to recall. Received software update (1.0) & sold to me 30 June. If useful for comparison (& because I'm curious) pls run the vin.

 

[Rumline]

Just found this thread. Bless you folks for taking your time to help others.

And while I'm at it, could you please look mine up? ? The dealer's going to have it for a few days so I'd like to ask them to run all the updates. VIN: 3FMTK3SU5MMA02723

 

[mcyee1]

Adding one - my car is CURRENTLY at the dealer and they can't figure it out. Would someone like to look at: 3FMTK3SU2MMA05935

Thanks in advance!

 

[WyldStallyn]

Adding one - my car is CURRENTLY at the dealer and they can't figure it out.

What can’t they figure out?

 

[mcyee1]

My driver assist is broken and Blue Cruise has never been functional

 

[Mike G]

VIN: 3FMTK4SX5NMA21578
Not sure of exact build date, but before May 24th. Delivered to dealer June 2022 & was "un-sellable" due to recall. Received software update (1.0) & sold to me 30 June. If useful for comparison (& because I'm curious) pls run the vin.

Currently showing as available updates in FDRS:

22S41 recall related modules showing these revisions as applied on 29 June:

PCM NJ98-14C204-VC
BECM LK98-14C197-CG
SOBDM LJ98-14F476-AU
SOBDMB NK98-14H297-BC
SOBDMC NK98-14G069-VC

Mike

 

[Mike G]

Just found this thread. Bless you folks for taking your time to help others.

And while I'm at it, could you please look mine up? ? The dealer's going to have it for a few days so I'd like to ask them to run all the updates. VIN: 3FMTK3SU5MMA02723

Stop it...you mean to tell me that you have a build date of 6 November 2020 and you just now found this thread?

And clearly by these results you haven't had CSP 21P22 applied or 21G01 BlueCruise by the current versions of some of your modules.

I'll attach the relevant documentation for your reference and this evening's entertainment.

Here's your "to-do" list:

Please note that during the programming of BlueCruise (21G01) at step 19, if CSP 21P22 has not been done yet, the tech is supposed to stop and go back and do all the updates listed in CSP 21P22 prior to continuing to finish off the BlueCruise programming steps. So they might as well start with the CSP 21P22 to begin with.

Best,

Mike

 

[Rumline]

Wow that's quite the list! Thank you!

Stop it...you mean to tell me that you have a build date of 6 November 2020 and you just now found this thread?

Haha yep! Mine was a mannequin that I purchased right before I joined this forum in June of last year.

 

[Mike G]

Adding one - my car is CURRENTLY at the dealer and they can't figure it out. Would someone like to look at: 3FMTK3SU2MMA05935

Thanks in advance!

At the time of this post the tech was still working the issue. In fact about this time he was resetting the APIM for the first of two times. The double reset of the APIM is the last listed item in the 21G01 BlueCruise update procedure.

They did do programming throughout the day and at least on two occasions got a warning about the 12v battery being below the recommended state of charge and the system asked if the tech wanted to continue, he said yes everytime.

Hopefully you got your car back and everything is working.

You currently have no available updates showing in FDRS.

Mike

Sponsored