Post here if you have an active FDRS account and are willing to look up info for others

[Mike G]

BlueCruise 1.2?

Dunno. It's done but I haven't gone out for the test drive yet.

I can tell you that the rev number didn't change. There were three packages that got updated (I saw that all three had "PASSED" at the end.) But the F188 DID is still "-AM" and it looks like the engineering part number is still the same as it was before the update as well. ?‍

Total programming time was 5 minutes.

Sponsored

 

[Mike G]

So I took about a 25 mile drive using cruise on county roads and BC on the Interstate and there was no difference in behavior. No issues, but nothing different from before the update that I can tell. I did try the lane change with the turn stalk thing and nothing happened there. ?‍

 

[ChrisRSS]

Chris;

It looks like you have a DSM update that would likely address that:

Thanks for your support. So I'll talk to the dealer about the DSM update.

 

[Mark Hassa]

Hi Mike,

Was I lucky enough to get the PSCM update?
Thanks,
Mark
3FMTK3SSXMMA50149

 

[Mike G]

Hi Mike,

Was I lucky enough to get the PSCM update?
Thanks,
Mark
3FMTK3SSXMMA50149

Yup. ?

 

[Mark Hassa]

Maybe I’ll get lucky and it’ll be the 4.2.0 update lol

 

[miksu]

Hi Mike,

Would you check my car status, vin: WF0TK3SU0MMA18957.

 

[SebbaJR]

2 May '21 build date, Job 1 car ( built 5 days before my car)

If that's what they told you they have no idea what they are doing. You should call Ford and open a case with them.

Here's the list of available updates:

Tell them they need to do that GWM (gateway) update before they do anything else. Very important. It is a requirement to get further updates done.

It's been a while from this list and strangely in the meantime my MME received updates via OTA up to ver 2.1.0...
Since I'm planning to go to the dealer in the next weeks, can anyone check again my VIN to see if anything's changed?

VIN: WF0TK1EM6MMA32149

Thanks.

 

[Mike G]

Hi Mike,

Would you check my car status, vin: WF0TK3SU0MMA18957.

No problem.

Here's your list of available updates:

 

[Mike G]

It's been a while from this list and strangely in the meantime my MME received updates via OTA up to ver 2.1.0...
Since I'm planning to go to the dealer in the next weeks, can anyone check again my VIN to see if anything's changed?

VIN: WF0TK1EM6MMA32149

Thanks.

You do have some additions...ask your tech to update the TCU before they update the APIM.

 

[mbrownwvu]

Thinking about trading a 2022 select for a First Edition. Can someone check 3FMTK3SU5MMA20879 ? TIA

 

[Deleted member 5795]

Could someone please pull up my VIN and let me know what modules are needing updating?

3FMTK4SEXMME01710

I recently took it to the dealership and they are telling me there are no updates.

TYVM

 

[Mike G]

Could someone please pull up my VIN and let me know what modules are needing updating?

3FMTK4SEXMME01710

I recently took it to the dealership and they are telling me there are no updates.

TYVM

Here's what's available this morning:

 

[Mustang_Simon]

Hi.

Could I trouble someone to look up my VIN please? Had my MME in with the dealer for a recall and some updates and it’s come back with the frunk malfunction error. The dealer said they’d done all the updates available and are stumped. Would just like to sanity check that!
VIN WF0TR1RM5MMA29538

Thanks in advance.

 

[buffasnow]

Taking my First Edition in Wednesday for the roof & windshield recalls, as well as a bunch of updates (22S41, 22B28, 21G01, 22B08). I would like to know where I stand now before I take it in, so if someone has a moment to check 3FMTK3SU5MMA10711, I would appreciate it.

Sponsored