Post here if you have an active FDRS account and are willing to look up info for others

[Mark Hassa]

? I don't think FDRS does 'stealth' updates. The TCU might have come as an OTA though.

I honestly didn’t think this car was capable of anything more than downloading the latest Sync version. Now I see that it updated the APIM and TCU over Wifi. I did notice that it tried to download a ‘.gz’ file while driving yesterday as it was connected to my wifi hotspot on my phone.

Sponsored

 

[Mike G]

Good afternoon all…..
Beautiful day in NE Pennsylvania….

So……
Patiently waiting for another OTA update
Last update, Jan 23, 2023… 3.6.2

VIN-3FMTK3SU1MMA56293, 2021 Premium J2
If someone could check & see if something is out of sorts !?
Regards & thank you…..,

Bill Pitman

10 Oct '21 build date, Job 2 car.

I'm afraid you're going to have to see a dealer to get sorted.

The reason is, as you can see below, there are no gateway (GWM), APIM (Sync), or TCU (telematics modem) updates in your list so something is keeping you from getting any new updates. And this list is just going to get longer. You're on what I think is Sync 539, based on the software revision number. The most current version is Sync 713.

 

[SimS]

January 2021 build SR Select
VIN 3FMTK1RMXMMA08379

I haven't received an OTA update since September '22.

I'm curious if there is some kind of conflicting software bug/module/update that is preventing further updates.

Thanks in advance for any info.

Sim

 

[Mike G]

WF0TK1EM7NMA10419

Can you please check mine?

Your list is a little bit smaller than it was last October:

None of these updates are likely to come as OTAs though.

 

[Mike G]

January 2021 build SR Select
VIN 3FMTK1RMXMMA08379

I haven't received an OTA update since September '22.

I'm curious if there is some kind of conflicting software bug/module/update that is preventing further updates.

Thanks in advance for any info.

Sim

15 Jan '21 build date, Job 1 car.

If I'm reading this right you have comfort but not tech, correct?

And I think you're on Sync 640?

I don't see anything specific that might be causing a dependency issue, except maybe the fact that your IPC hasn't been updated because your car isn't BC capable. If it were me I would have asked that all the cruise control related updates got done even though you don't have BC just to ensure that all the revisions were compatible. So we're specifically talking about the CCM, IPMA, PSCM, and IPC in the list below:

 

[SimS]

15 Jan '21 build date, Job 1 car.

If I'm reading this right you have comfort but not tech, correct?

And I think you're on Sync 640?

I don't see anything specific that might be causing a dependency issue, except maybe the fact that your IPC hasn't been updated because your car isn't BC capable. If it were me I would have asked that all the cruise control related updates got done even though you don't have BC just to ensure that all the revisions were compatible. So we're specifically talking about the CCM, IPMA, PSCM, and IPC in the list below:

Thanks for the fast response. As far as comfort vs tech, I have a basic Select with no options. I wanted to be an early adopter, but I didn't want the complications of all of software driven features. So far, so good except for the OTA process.

Sim

 

[ymmrob]

Picked up a 22 GTPE that has been sitting on a dealer lot, believe build was August 2022. No updates yet, wonder if anyone can provide any insights?

Thanks!

3FMTK4SX7NMA51374

 

[Mike G]

Picked up a 22 GTPE that has been sitting on a dealer lot, believe build was August 2022. No updates yet, wonder if anyone can provide any insights?

Thanks!

3FMTK4SX7NMA51374

2 Sep '22 build date, GT PE

Here's the list of available updates:

That gateway (GWM) update will likely come as an OTA. I'd set the daily update check to a time you'd be driving the car, like during a normal commute. They get more updates that way.

 

[Elektronik]

Your list is a little bit smaller than it was last October:

None of these updates are likely to come as OTAs though.

Thanks Mike. Is there anything from this list I need to demand to be updated by dealer or it's nothing important there?

 

[Jdonnarumma]

Looks like the latest time you had the car in was starting on the 21st through the 25th. At least those are the days that programming was done. On the 29th and 30th somebody checked your VIN in PTS but no work was done on those days.

These modules were successfully programmed in the sequence shown, unless noted otherwise:

21st: HVAC, PATS (Keyfob), PCM, SOBDM, SOBDMB, SOBDMC, BECM, WACM, GFM, GSM, OBCC, PSCM were updated.

22nd: DSM, BCM were updated.

23rd: IPC, GWM, APIM (failed), APIM (failed), APIM (succeeded), GWM, APIM, GWM, TCU, GWM (failed), GWM (succeeded).

24th: APIM (failed) "Procedure Unsuccesful - ParseAndCompareFlashActionApplications Unable to obtain software binary file: NU5T-14H212-MH"

25th: APIM (failed) "The programming or part number validation process has failed."

Your current software revision is the 14G676-DT which I believe equates to Sync 539. It's the version where connection to two cell phones was enabled.

So I don't know if they told you they had problems updating that APIM any further, but as far as Sync goes you have been updated to just before the update for the new UI (Sync 640) and you have an APIM update in your list now:

So that APIM update in your list was the one they couldn't get to process using FDRS in the shop. You might ask them what their next move is since if they couldn't get it to update using FDRS it's likely not going come as an OTA either. So they would have to address this or you probably won't get any more updates to Sync.

The door module updates came out after your last visit.

Looks like the latest time you had the car in was starting on the 21st through the 25th. At least those are the days that programming was done. On the 29th and 30th somebody checked your VIN in PTS but no work was done on those days.

These modules were successfully programmed in the sequence shown, unless noted otherwise:

21st: HVAC, PATS (Keyfob), PCM, SOBDM, SOBDMB, SOBDMC, BECM, WACM, GFM, GSM, OBCC, PSCM were updated.

22nd: DSM, BCM were updated.

23rd: IPC, GWM, APIM (failed), APIM (failed), APIM (succeeded), GWM, APIM, GWM, TCU, GWM (failed), GWM (succeeded).

24th: APIM (failed) "Procedure Unsuccesful - ParseAndCompareFlashActionApplications Unable to obtain software binary file: NU5T-14H212-MH"

25th: APIM (failed) "The programming or part number validation process has failed."

Your current software revision is the 14G676-DT which I believe equates to Sync 539. It's the version where connection to two cell phones was enabled.

So I don't know if they told you they had problems updating that APIM any further, but as far as Sync goes you have been updated to just before the update for the new UI (Sync 640) and you have an APIM update in your list now:

So that APIM update in your list was the one they couldn't get to process using FDRS in the shop. You might ask them what their next move is since if they couldn't get it to update using FDRS it's likely not going come as an OTA either. So they would have to address this or you probably won't get any more updates to Sync.

The door module updates came out after your last visit.

Appreciate the info. Does you system provide the power up version that is currently in the car? Can't find it on the sync screen nor the ford pass app. My guess its an old one.
OTA updates have been almost non-existent for me. Only twice since I have the car.

 

[Mike G]

Appreciate the info. Does you system provide the power up version that is currently in the car? Can't find it on the sync screen nor the ford pass app. My guess its an old one.
OTA updates have been almost non-existent for me. Only twice since I have the car.

FDRS provides no info on PowerUps. Your service advisor can pull your VIN and look up your PowerUp status in the "OTA Dashboard" while you're on the phone, and tell you about any activity going back 60 days. If there hasn't been any activity it's a good time to have the discussion about diagnosing why you aren't getting OTAs.

 

[Mike G]

Thanks Mike. Is there anything from this list I need to demand to be updated by dealer or it's nothing important there?

Well if you aren't having any problems then there isn't much there that is critical.

 

[worachj]

Low priority lookup request … it’s more of a curiosity thing for me than anything else.

I have had my 2023 Select for just a little bit over three weeks now. And on March 22 I was updated to power-up 4.2.2.2.

The only very small annoyance is the welcome lights not coming on with a FOB walk up. So, I feel lucky with what I got so far. Guessing it is a missing a door control module update???

XXXXXXXXXXXXXXXXX

Thanks
John

 

[Mike G]

Low priority lookup request … it’s more of a curiosity thing for me than anything else.

I have had my 2023 Select for just a little bit over three weeks now. And on March 22 I was updated to power-up 4.2.2.2.

The only very small annoyance is the welcome lights not coming on with a FOB walk up. So, I feel lucky with what I got so far. Guessing it is a missing a door control module update???

3FMTK1SS9PMA13070

Thanks
John

OBCC and the HVAC update is all you've got so far. No door modules for you.

 

[reoquinn]

Hi Mike,

Can you run mine again?

VIN: 3FMTK1SS5NMA25200

Thanks,

Rob

Sponsored