On the 17th they updated your powertrain. This powertrain update superseded the one you got previously. They come out with new powertrain updates roughly 5 times a year and more if they have to fix something...like this last set.
It is Ford updates being Ford updates...meaning they just aren't pushing things to your car. There's no indication that the server tried to send you anything since the 22nd of March.
Thank you! I'm going to reach out to a service center near me and take it in. Would i be fine driving the car for a day or so while i can get an appointment?
I suspect they'll put it on FDRS and simply reset the BECM and take it for a quick test drive. If the fault doesn't come back they'll send you on your way. You could actually wait for the car...take 10 minutes to do this BECM counter clear thing. They had to do it to my '23 model and I haven't had the issue return so far.
Your car is reporting too many codes to be able to print out the entire 60 days history. The screenshot below shows the codes it reported that last time you drove it.
Hmmmm nothing there regarding a transmission pump? The adas codes are from openpilot.Your car is reporting too many codes to be able to print out the entire 60 days history. The screenshot below shows the codes it reported that last time you drove it.
Also I've driven the car since 854am so there should be a newer issue?Your car is reporting too many codes to be able to print out the entire 60 days history. The screenshot below shows the codes it reported that last time you drove it.
Thanks Mike. Not sure if any of those are critical. I just got 6.8.0 when I brought the car home, so still a few OTAs behind.On the 17th they updated your powertrain. This powertrain update superseded the one you got previously. They come out with new powertrain updates roughly 5 times a year and more if they have to fix something...like this last set.
Here's what you have still available:
Ummm nope..the only thing you have now is the RFA.
Hi again. For my 2023 job 1 MME GT PE, am I missing anything that would improve my Magneride suspension? I now have 1500 miles and find my suspension to be very jarring in all drive modes. (I am not sure I can tell the difference from one mode to another). I like everything about my car except the suspension. I find it terrible in every way and often think something must be broken. I just don't know what to do about it and have read as much as I can find about it in the forums here. I have owned 3 new Mustang GT's as daily drivers, 1996, 2003 and 2017 which was a premium GT and didn't think anything about the suspension and loved the cars. I find this car almost undriveable but now stuck in my 3 year lease with it.Since you already have BC 1.2, if you were to fully update your vehicle, you would pretty much have BC 1.4. The only difference between 1.2 and 1.4 are stability improvements.
,The IPMA/PSCM updates there would make BC work much better.
You have an available set of powertrain updates that could be applied. But the VDM module itself has no update showing (it's current), and you also have no VDM DTCs in your vehicle health history.
