Post here if you have an active FDRS account and are willing to look up info for others

[dhova97]

Can someone look at this ....
3FMTK1SS3MMA18793

Sponsored

 

[Mike G]

Can you guys run my vin for any updates I may need before I make my appointment. Thanks so much.
3FMTK1SS1NMA16610

This is all that shows up right now:

 

[Mike G]

My 21 UK model is again receiving updates, I guess possibly the pause has ended.

WF0TR3SU0MMA19392

I'm not sure how many it's had, but it's up to 5.1.1 - could I have a check of what it's got and if it has any others in progress?

Nothing in progress at the moment, but you're right..it was 5.1.1 (a gateway update).

Here's the currently available software in FDRS for your VIN:

 

[Mike G]

Hello, can you check my vin please : WF0TK3R78PMA83835
I'd like to know where I am with my 2023.5 (presumably) before considering the FDRS route
I just got 6.14.0 and ECG-24.2.4.10.2, then back in June was ECG-24.2.4.9
Thanks in advance!

You've gotten three gateway updates in a row, followed by the APIM (6.14.0) today.

Here's the list of available software showing in FDRS for your VIN:

 

[Mike G]

Can someone look at this ....
3FMTK1SS3MMA18793

No available updates.

 

[zvez]

That's not listed as one that's been applied or in the queue for your VIN.

You might want to try resetting the maximum opening height manually:
SETTING THE LIFTGATE OPENING HEIGHT

1. Open the liftgate.

2. Stop the liftgate movement by pressing the control button on the liftgate when it reaches the desired height.
Note: Once the liftgate stops moving, you can manually move it to the desired height.

3. Press and hold the control button on the liftgate until a tone sounds, indicating programming is complete.
Note: You can only use the liftgate control button to program the height.
Note: You cannot program the height if the liftgate position is too low.

4. The power liftgate now opens at the programmed height. To change the programmed height, repeat the steps.
Note: You can fully open the liftgate by manually pushing it upward to the maximum open position if it opens in a lower position.
Note: The system recalls the new programmed height until you reprogram it, even if you disconnect the battery.

If that doesn't work you'll need to get this RGTM update applied with FDRS or wait for the OTA fairy to bring it for the holidays.

Thanks MIke I'll try re adjusting the liftgate, but it seems more than likely a vist to the dealer to get the RGTM update applied. As I've had the car over a year and this ota came out long ago, I guess I won't get the OTA.

 

[Mike G]

@keithnteri

CSP 23B50 has been supplemented and is back on the books and extended until late October of next year. It's still just an update to whatever powertrain modules you have available (in FDRS) at the time you visit your servicing dealer. Primary reason for extending this out seems to be the addition of the '22 model Lightnings.

I checked your VIN, and it's not currently listed as an open action for your car. ?‍

 

[lan2105]

3FMTK4SE2PMA45001

 

[Mike G]

3FMTK4SE2PMA45001

 

[lan2105]

Thanks Mike quick question why is it saying power train fault and high voltage battery ffault

 

[shrky]

Can someone look up 3FMTK3SU4MMA26818?

I recently had my HVBJB work done and am curious what they did and didn’t update. Thanks!

 

[agspace]

Thanks in advance for the help.
VIN: 3FMTK3S53RMA04244

post that brought me here:
——————————
I had the same message (High Voltage Battery issue and Drivetrain issue) pop up last weekend. Started with battery not charging and vehicle completely dead with last read at 9%. Ford roadside assist helped charge the 12V battery so I could access the car. Got the message when driving onto tow truck bed. Took it to public charging but still would not charge. Took it to dealership and left it for a couple of days. They had to change out the 12v battery. Got it back on Tuesday. Have had the car 33 days and wife was stranded with the lockout. :/

 

[dpratel]

Will someone please check 3FMTK4SX8NMA24653 for any available updates? TIA

 

[rugedraw]

Thanks Mike quick question why is it saying power train fault and high voltage battery ffault

BECM needs to be updated as per the SSM referenced by the codes your car is reporting.

 

[TheProgrammer]

Hey! Hate to return to this thread as it usually means I am having an issue... My HVBJB died for a second time, and in the repairs they also had to replace one of my modules. Since getting the car back, I have a failed 10.1 OTA update that refuses to run...

VIN: 3FMTK4SX6NMA01582

Assuming they need to manually update my modules before OTA updates start working again (had to do this in the past), but I figured I'd check to see if theres anything else glaringly obvious that would cause the OTA to fail.

Thanks so much!!!

Sponsored