The Complete DIY Guide to Updating Your Mach-E with FDRS

[generaltso]

I may have missed this above, but what's the charging pad soft update to not detect metal?

It's a software update in FDRS that either allows the charging pad to detect metal or the other option is not to detect metal. I guess it was for helping the overheated phones. I don't get it, that's why I was asking?

By default, the charging pad will detect metal objects placed on it that could trigger a false charging request. You can turn that auto-detection off, but it doesn't really seem to do much.

Sponsored

 

[Wonky_Donkey]

Might be old news - but just had these pop up for my 2022... another round of door controller updates ?

These are my current module versions prior to running these updates:

 

[Mike G]

Might be old news - but just had these pop up for my 2022... another round of door controller updates ?

These are my current module versions prior to running these updates:

Same on my 21J1 this morning along with a new version of FDRS.

 

[markboris]

In addition to those door module updates, I also got an HCM update.

 

[Mike G]

In addition to those door module updates, I also got an HCM update.

You're the second GT PE this morning with the HCM. But I think you folks are the only ones getting that.

 

[benk016]

I'm seeing all 4 door module updates today, plus an HCM update on almost every car i've checked as well.

 

[benk016]

You're the second GT PE this morning with the HCM. But I think you folks are the only ones getting that.

I've seen it on a '22 non-gt as well

 

[21st Century Pony]

I also have a new TCU update in FDRS, as well as a new HCM update. AWD Premium ER.

 

[markboris]

That TCU update was a week or more ago, don't remember unless there is a new one.

 

[21st Century Pony]

That TCU update was a week or more ago, don't remember unless there is a new one.

It's new to my car as of last night. I check weekly or more often if I'm bored.

BTW - the last two FDRS software updates seem to have made FDRS much more snappy.

 

[Wonky_Donkey]

Might be old news - but just had these pop up for my 2022... another round of door controller updates ?

These are my current module versions prior to running these updates:

...and for those that care - the new module versions are.....

so I've gone from -AH to -AM

 

[Mach-Lee]

...and for those that care - the new module versions are.....

so I've gone from -AH to -AM

IIRC the bad version that triggered alarms was -AL (oh, the irony of that suffix), so -AM would appear to be the patched version that hopefully doesn't trigger alarms?

 

[Mike G]

I also have a new TCU update in FDRS, as well as a new HCM update. AWD Premium ER.

Seriously? WTF is wrong with my car? I want an HCM update too!

 

[Mike G]

IIRC the bad version that triggered alarms was -AL, so -AM would appear to be the patched version that hopefully doesn't trigger alarms?

Wait...we're back to "-AM" rev again on the doors?

Didn't we do "-AM" before a couple of times or was that "-AN"?

So confusing.

 

[Wonky_Donkey]

So I've got a quick question for anyone prepared to chip in....

I've had this persistent DTC on my SOBDMC module for the last 5 months or so and it won't clear down like many of the other transient DTC's after FDRS updates.

It's a U2101:00:2F Control Module Config Incompatible - and I've Googled, I've searched Ford PTS and I can find no reason or cure.

I'm considering doing a PMI on the SOBDMC to see if that will clear it - but that seems like a bit of a nuclear option.

Any suggestions?

Sponsored