FORScan MME spreadsheet

[Chapron]

It's in my previous post:

https://www.macheforum.com/site/threads/forscan-mme-spreadsheet.24701/post-1000768

Thanks it worked and looks well both Regen and power are working!

Sponsored

 

[MVasco]

Thanks it worked and looks well both Regen and power are working!

Glad to hear! Hope somebody can help with UFO and backup sound. I haven't been able to switch it off.

 

[Chapron]

What I next like to remove is the powerlift rear door beeping When opened or closed by motor.

 

[Chapron]

Hello. What doest Bideo on demand do ?

 

[LaFong]

Hello. What doest Bideo on demand do ?

The only post I could find says “It allows you to watch DVDs on the Nav screen while the car is in Park. Not so with the GT350. I enabled the parameter, but the DVD I inserted wouldn't play“. Not sure he is correct. If he is, not sure it’s useful or supported on the MME.

 

[Chapron]

I try to enable the speedlimit exeed chime in ipma(I guess). The option switch is enabled in APIM and there but the function it self is not there. Any idea which that is in the spreadsheet?

 

[HughJazzol]

Glad to hear! Hope somebody can help with UFO and backup sound. I haven't been able to switch it off.

there are many posts about removing the backup sound. It involves physically disconnecting a speaker in the back of the car, and making a change in forscan so that the speaker disconnect doesn't produce an alarm.

 

[HughJazzol]

which speaker do you plug it into? Tried looking for instruction online but didn’t find any. Does the product come with them?

there is a post or 2 explaining the 2 steps required to remove the backup beep. You have to disconnect a speaker in the back of the car, and then make a change in forscan so that the disconnect of the speaker doesn't generate an alarm. Look for it under the Interior Mods forum, probably.

 

[MVasco]

there is a post or 2 explaining the 2 steps required to remove the backup beep. You have to disconnect a speaker in the back of the car, and then make a change in forscan so that the disconnect of the speaker doesn't generate an alarm. Look for it under the Interior Mods forum, probably.

I would be more into disabling UFO sound than backup sound. Is it the same speaker?

 

[Chapron]

Would be the Police dark mode an option? Havnt tried it (yet)

 

[markboris]

I try to enable the speedlimit exeed chime in ipma(I guess). The option switch is enabled in APIM and there but the function it self is not there. Any idea which that is in the spreadsheet?

I tried to do the same thing on my '21 several years ago and could not get it to work. Remember, these options/settings are not just for the Mach-E. Most do nothing for this car.

 

[Chapron]

I agree but the car did that in the beginning and after whatever OTA this went missting.

 

[markboris]

I agree but the car did that in the beginning and after whatever OTA this went missting.

Yes, OTA updated do tend to mess with some settings we make in FORScan.

 

[markboris]

Hope somebody can help with UFO and backup sound. I haven't been able to switch it off.

There are many posts about removing the backup sound. It involves physically disconnecting a speaker in the back of the car, and making a change in forscan so that the speaker disconnect doesn't produce an alarm.

I would be more into disabling UFO sound than backup sound. Is it the same speaker?

Not sure about the rest of the world but in the US, there is only one speaker and it is in the front of the car, not back. Both the Pedestrian Warning sound and back-up beeping come from that speaker. The easiest way to disable this is to remove the connector going to the speaker and shove a 4 ohm resistor into that connector. That is it. No need to mess with FORScan.

 

[Jetsurly]

Is there a change to disable or increase the “eyes away” when using both BC and cruise control?

Sponsored