Post here if you have an active FDRS account and are willing to look up info for others

[tonytaylor53]

I had the 12v recall performed, and I'm wondering if they updated the rest of the modules. I had the car 10 months before I got my first OTAs a few weeks ago.

3FMTK4SX9RMA33092

Sponsored

 

[first_EV_is_a_MME]

Thank you. Yikes, I'm hoping my 3rd party warranty covers what this might cost to fix...

 

[rugedraw]

Thank you. Yikes, I'm hoping my 3rd party warranty covers what this might cost to fix...

You can calibrate the IPMA yourself with FORScan. Unless something really is well out of alignment, in which case the calibration procedure would fail.

 

[jmgreen]

You can calibrate the IPMA yourself with FORScan. Unless something really is well out of alignment, in which case the calibration procedure would fail.

Could you please elaborate a bit on this? E.g. where to find this, and what is to be done after activation? Furthermore, is there any risk to run the procedure?
I am asking as I frequently see the a B1578:89 code in the IPMA. So it could be interesting to apply this calibration.

 

[rugedraw]

Could you please elaborate a bit on this? E.g. where to find this, and what is to be done after activation? Furthermore, is there any risk to run the procedure?
I am asking as I frequently see the a B1578:89 code in the IPMA. So it could be interesting to apply this calibration.

Click the IPMA in the wrench icon with FORScan, and it will bring up a list of service procedures on it. One is the 360 degree camera calibration and the other is the lane keep calibration. Both are done with the laptop plugged in while driving. FORScan will provide the instructions you need to follow along the process.

 

[Mike G]

Looking at adding another car, to the family anything outstanding, Thank You.
3FMTK3R73NMA15553

Needs the 25S65 recall performed and would benefit from the CMR and IPC being updated. No DTCs of any significance being reported by the car.

 

[Mike G]

I had the 12v recall performed, and I'm wondering if they updated the rest of the modules. I had the car 10 months before I got my first OTAs a few weeks ago.

3FMTK4SX9RMA33092

You currently have no OTAs in progess....or pending, etc.

Here's the list of available software updates in FDRS:

 

[Mike G]

Hi:
Getting close to the end of the 35k warranty. I'm wondering if there's anything to be learned that I should take to my dealer while I can:
3FMTK2SU7PMA13981

I know I have an incomplete update. Haven't been able to trick it yet...

 

[Mike G]

Hello. I purchased my 21 GT in August and am curious to see if I have a backlog of OTA updates that I don't know about. Could someone have a look and provide me some insight? Thanks in advance to the community! 3FMTK4SE7MME02605

This is the list of available updates for your car in FDRS. Nothing critical here unless you're having an issue or specific concern.

I've sent you a DM with an additional concern that I believe needs to be investigated.

 

[Mark Hassa]

Hi:
Getting close to the end of the 35k warranty. I'm wondering if there's anything to be learned that I should take to my dealer while I can:
3FMTK2SU7PMA13981

I know I have an incomplete update. Haven't been able to trick it yet...

Get them to check the health of the 12v battery. I got mine replaced under the warranty as it tested poorly. They tend to fail around the 3 yr mark.

 

[AC123123]

I went back to the dealer again, and they fixed some issues relating to bluecruise not working as well as several other things I complained about

Can you please post if any updates are still remaining?

VIN: 3FMTK3R77PMA66315

 

[Mike G]

I went back to the dealer again, and they fixed some issues relating to bluecruise not working as well as several other things I complained about

Can you please post if any updates are still remaining?

VIN: 3FMTK3R77PMA66315

 

[AC123123]

Wow, they updated nothing. Does anyone know of a dealer or individual with fdrs access in the Atlanta ga area of USA willing to do the updates?

Alternatively, anyone willing to rent me their vci cable? $500 for one time use seems wasteful.

 

[kennelh]

ALternatively, anyone willing to rent me their vci cable? $500 for one time use seems wasteful.

@rugedraw rents them out.

 

[rugedraw]

@rugedraw rents them out.

Actually, I loan them.....I don't rent them for profit.

@AC123123 You'll need to get a power supply for the IPMA/PSCM updates. You'll be able to knock all of those out except the BCM which requires a dealer login to do.

Edit: Afer speaker with Mike G, it is possible the BCM can be updated without a dealer login depending on which update it is.

Sponsored