Motomax
Well-Known Member
- First Name
- Max
- Joined
- Jul 19, 2021
- Threads
- 5
- Messages
- 1,019
- Reaction score
- 1,027
- Location
- California
- Vehicles
- VW GLI, 4Runner
Awd in its basic form is no better than 2WD in certain loss of traction situation, only 1 wheel will spin freely. 4WD locks the front and rear difs together, which means in the same situation 2 wheels will spin freely. Certain AWD vehicles use limited slip center difs which allows 2 wheels to spin (Subaru is especially good with a 50:50 power split f-R).Granted, these are artificial conditions, but you don't see mainstream EVs do better in the roller tests done by TFLCar or Car Question. In general, it seems like cars like the Mach E or Model Y do worse than Subarus or Audis when perhaps that shouldn't be the case. If the more precise control over axle speed that can then be modulated side-to-side was such an advantage, why don't we see better results? Most AWD EVs need to be pushed off the rollers with 3 wheels artificially "stuck."
Awd EVs if programmed correctly can act exactly like a 4WD system (minus the lowgear).
here’s the catch, every single one of those vehicles will fail the 3 roller traction test because at best they can only drive two wheels.
so how do you pass the test? You use the brakes! If you can apply the brakes to the spinning wheel, it will allow your differential to send power to the wheel on the other side. It acts like a less effective locker.Vehicles that don’t have 50-50f-r split will not do as well in this test either. It just won’t be able to push enough power to that one wheel.
AWD EVs can definitely pass this test.Plus, the ability to control the front and rear motor would actually make it much easier since they only need to brake one wheel. The only thing better would be 3-4 motors. They just need to have a traction control system that knows how to handle it.
Sponsored
Last edited: