So reset the APIM yesterday and again today, still getting that error message popping up randomly going between screens, mostly profile. Any chance you can check my codes again and see if anything might be in queue?
@Calvinvshobbes You're showing a GWM, so that's good. That's what you need to get more updates rolling.
Thank you! I’ll just be patient and wait for the next round of updates. Appreciate the help!
Thank you so much for letting me know in a post mention. After two years of Unbridle 1PD it is hard going back to using the brake pedal all the time. Though the change from Unbridled to Unbridle a while back still confuses me on why they renamed it. It looks like from the pictures it is coming across as those four updates? So that I have something to bring with me to the service writer do you mind running my VIN so I can print it out? Now if only I can get the OTAs to install as I have been on 6.2 since November. Probably not much I can do about that though.
It will take longer to setup the powersupply and laptop than it will to do these updates. It took me 10 minutes to do all three.
So I spent the weekend doing updates on both cars. The Lightning went swimmingly. I had some issues with the MachE. When doing the IPMA, the first time it failed when I had a laptop issue. After running it a second time, it failed to program at the end, and so did the forced PSCM update. I think this is because my 2 day license expired mid-update.
I would start with the GWM, then APIM, (and see if another GWM, or APIM, or TCU pops up) and then move on to the IPC, the CMR, then the IPMA/PSCM combo, and end with the GFM.
...
As @rugedraw pointed out you have no OTA history going back at least 60 days.
What's been happening with IPMA updates recently is they flash the module packages fine, but fail to do the config step at the end (runs forever and has to be stopped). So re-running the update attempt usually results in the process going very quickly once FDRS confirms you already have the correct software package revisions, and it jumps directly to the config step.
This is great info! Thanks for that. Question about the GWM update, though. Is this an update that will eventually be pushed via OTA and Ford just hasn't moved on it yet? My biggest concern is being behind on OTAs, not necessarily updating anything with FDRS at the moment.You've got the bluecruise 1.4 updates pending, as well as HVAC, RFA, ACM and IPC.
I would start with IPC, then the others.
In terms of the 6.14 update, you are also blocked by a pre-requisite GWM update (you are on PAJ but need PAL). This will not show up in FDRS for you, but like the others above, if you send me your VIN I can see about getting that GWM update for you to install manually. Once installed you will be offered the APIM 6.14 update in FDRS.
It should go out OTA eventually, but the core issue is that it’s not showing in FDRS (which is typically a pre-req for OTA). There may be a dependency issue for the GWM that Ford hasn’t fixed yet, but there’s no way to know for sure.
